Owner`s manual

12
Video Sync
Video SyncallowstheKVMtostorethemonitor’sEDID(ExtendedDisplayIdenticationData),which
helpstoensurethattheoptimalvideosettingsarebeingused.ToinitiateaVideo Sync,dothe
following:
1. ActivateHotkey Setting Modeusingtheaforementionedcommand
2. Pressandreleasethe[D]key
Alternative Pushbutton Command
PressingoneofthepushbuttonsonthefrontoftheKVMwillbringthefocusofoneofthefollowing
tothecorrespondingport;KVM only, Audio only,orKVM, Audio and USB focus simultaneously.
Therearetwosetsofpushbuttoncommands,DefaultandAlternative(SeetheManual Pushbuttons
sectionofthemanualfordetails).Totogglebetweenthesetwo,dothefollowing:
1. ActivateHotkey Setting Modeusingtheaforementionedcommand
2. Pressandreleasethe[S]key
Mouse Emulation
Bydefault,Mouse Emulationisenabled.Totogglemouseemulationon/off,dothefollowing:
1. ActivateHotkey Setting Modeusingtheaforementionedcommand
2. Pressandreleasethe[M]key
Mouse Port Switching
Whenenabled,theMouse Port Switching Functionalityallowsuserswithscroll-wheelmiceto
simultaneouslyswitchthefocusoftheKVM, AudioandUSBbetweenportsbydouble-clickingthe
scrollwheelontheirmouse(SeetheMouse Port Switching Functionalitysectionofthemanualfor
details).Bydefault,Mouse Port Switching Functionalityisdisabled.Totogglethisfeatureon/off,do
thefollowing:
1. ActivateHotkey Setting Modeusingtheaforementionedcommand
2. Pressandreleasethe[W]key
Keyboard Emulation
Bydefault,Keyboard Emulationisenabled.Totogglekeyboardemulationon/off,dothefollowing:
1. ActivateHotkey Setting Modeusingtheaforementionedcommand
2. Pressandreleasethe[N]key
SPC Mode
Thekeyboard/mousecanbesettoworkunderspecialoperatingsystemsasastandard(104key)
keyboard/mouse.ToturnSPC Modeon/off,dothefollowing:
1. ActivateHotkey Setting Modeusingtheaforementionedcommand
2. Pressandreleasethe[F1]key
Power on Detection
Bydefault,theKVMissettorecognizewhenaconnectedcomputerispoweredoff,atwhichtime
itautomaticallyswitchestothenextpoweredonport.ToturnPower on Detectionon/off,dothe
following:
1. ActivateHotkey Setting Modeusingtheaforementionedcommand
2. Pressandreleasethe[E]key
Basic Operation
14-03-189-93334F.indd 12 4/18/2014 4:43:59 PM