Switch User Manual

Mounting and Stacking

For convenience in large installations, the unit is supplied with the necessary hardware for it to be rack

mounted in a 19” (1U) system rack, or stacked.

For Rack Mounting:

1. Screw the mounting brackets into the sides of the unit.

2. Slide the unit into the rack and secure it to the rack.

For Stacking:

1. Screw the stacking brackets into the corners of the unit. Note that there is a top and bottom half to

each bracket. The bottom half has a concave surface and two screw holes; the top half has a convex

surface and one screw hole.

2. Line up the four bottom brackets of the top unit with the four top brackets of the bottom unit.

3. Fit the top unit into place.

Appendix

200603163 93-2538 B007-008 manual.qxd 4/19/2006 1:45 PM Page 14