Owner’s Manual DVI/USB + Audio & Peripheral Sharing KVM Switch Model: B043-DUA8-SL Table of Contents Package Contents Optional Accessories System Requirements Product Features Front Panel Safety Instructions Rackmount Installation System Installation Operation Warranty & Warranty Registration 2 2 2 2 3 4 5 5 6 8 1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support Copyright © 2014 Tripp Lite. All rights reserved. 1 14-03-102-933345.
Package Contents • B043-DUA8-SL KVM Switch • External Power Supply (Input: 100-240V, 50/60Hz; Output: 9V, 2A) • Rackmount Hardware • Owner’s Manual Optional Accessories • P312-Series 3.5 mm Mini Stereo Audio Cables • P556-Series DVI Male to VGA Male Adapter Cables • P561-006-SLI DVI-I Single-Link Digital/Analog Cable – 6 ft. • P561-Series DVI-D Single-Link Cables • P759-Series DVI-D/USB/Audio KVM Cable Kits • U022-Series USB 2.0 A/B Device Cables • UR022-Series Reversible USB 2.
Front Panel 4 5 1 6 2 3 1 USB 2.0 Hub Ports – Two hub ports allow for USB peripheral sharing among connected computers. 2 BANK LED – This 2-digit display represents the KVM’s place in a cascaded installation hierarchy. The first KVM in a chain will have a BANK number of 00; standalone KVM’s will also have a BANK number of 00. A KVM that is cascaded to the PC 1 ports will have a BANK number of 01, a KVM cascaded to the PC 2 ports will have a BANK number of 02, and so on.
Safety Instructions • Read all of these instructions and save them for future reference. • Follow all warnings and instructions marked on the device. • Do not place the device on any unstable surface (cart, stand, table, etc.). If the device falls, serious damage will result. • Do not use the device near water. • Do not place the device near, or over, radiators or heat registers. The device cabinet is provided with slots and openings to allow for adequate ventilation.
Rackmount Installation Attach the included rackmount brackets to the KVM switch. Using user-supplied screws, fasten the rackmount brackets to the rack. System Installation Standalone Installation Note: Before making any connections, turn off the power to the KVM switch and all devices that are being connected. 1 Connect your monitor to the DVI-I Female console port on the back panel of the KVM switch.
System Installation 8 Connect up to two USB 2.0 devices to the USB hub ports on the front panels of the first- and second-level KVM switches. Note: Connected USB 2.0 devices can only be accessed by computers that are directly connected to the corresponding KVM switch. For example, a computer connected to a KVM switch with BANK 01 will not be able to access the USB 2.0 devices connected to the KVM switch with BANK 00.
Operation Bind KVM and USB Hub Functionality [Scroll Lock] [Scroll Lock] [Z] When the KVM and USB Hub functionality have been unbinded, performing this hotkey command will bind them back together. The focus of the USB Hub ports, KVM and Audio will now all switch at the same time. The KVM and USB Hub functionality are binded together by default.
Warranty and Warranty Registration 1-YEAR LIMITED WARRANTY Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for a period of 1 year from the date of initial purchase. If the product should prove defective in material or workmanship within that period, Seller will repair or replace the product, in its sole discretion.
