Owner`s manual

5
System Installation
Rackmount Installation
AttachtheincludedrackmountbracketstotheKVMswitch.Usinguser-suppliedscrews,fastenthe
rackmountbracketstotherack.
Standalone Installation
Note: Before making any connections, turn off the power to the KVM switch and all devices that are
being connected.
1
ConnectyourmonitortotheDVI-IFemaleconsoleportonthebackpaneloftheKVMswitch.
Note: A VGA monitor can be connected using a DVI to VGA adapter, such as Tripp Lite’s P556-
Series adapter cables. Computers that support analog audio through the VGA or DVI-I ports
must be connected to the KVM switch in order for video to be displayed on a VGA monitor.
2
ConnectyourUSBkeyboardandmousetothecorrespondingUSBconsoleportontheback
paneloftheKVMswitch.
3
Connectyourspeakersand/ormicrophonetothecorresponding3.5mmaudioconsoleportson
thebackpaneloftheKVMswitch.
4
UsingaP759-SeriesDVI-D/USB/AudioKVMCableKit,connectacomputertoanyofthe8
availablecomputerportsonthebackpaneloftheKVMunit.Note: A VGA computer can be
connected using an individual DVI to VGA adapter (such as Tripp Lite’s P556-Series adapter
cables), USB A/B device cable, and 3.5 mm audio cables. Video from a VGA computer will only
display if a VGA monitor is connected.
5
Repeatstep4foreachadditionalcomputeryouareconnecting.
6
ConnectuptotwoUSB2.0devicestotheUSBhubportsonthefrontpaneloftheKVMswitch.
7
ConnecttheincludedpowersupplytotheDCpowerjackonthebackoftheKVMswitch,then
plugitintoaTrippLiteSurgeProtector,PowerDistributionUnit(PDU),UninterruptiblePower
Supply(UPS),orwall-outlet.
8
Poweronallconnecteddevices.
Cascaded Installation
Note: Before making any connections, turn off the power to the KVM switch and all devices that are
being connected.
1
ConnectyourmonitortotheDVI-IFemaleconsoleportonthebackpaneloftherst-levelKVM
switch.
2
ConnectyourUSBkeyboardandmousetothecorrespondingUSBconsoleportontheback
paneloftherst-levelKVMswitch.
3
Connectyourspeakersand/ormicrophonetothecorresponding3.5mmaudioconsoleportson
thebackpaneloftherst-levelKVMswitch.
4
UsingaP759-SeriesDVI-D/USB/AudioKVMCableKit,connecttheconsoleportsofthesecond-
levelKVMswitchtoanyofthe8availablecomputerportsonthebackpaneloftherst-level
KVMunit.
5
Repeatstep4foreachadditionalKVMyouarecascading.
Note: Only 1 additional level of KVM switches can be cascaded for a maximum of 64 ports.
6
Connectacomputertoanyoftherst-orsecond-levelKVMswitches’availablecomputerports
usingaP759-SeriesDVI-D/USB/AudioKVMCableKit.
7
Repeatstep6foreachadditionalcomputeryouareconnecting.
14-03-102-933345.indd 5 4/2/2014 10:43:32 AM