Owner`s manual

6
System Installation
Operation
8
ConnectuptotwoUSB2.0devicestotheUSBhubportsonthefrontpanelsoftherst-and
second-levelKVMswitches.
Note: Connected USB 2.0 devices can only be accessed by computers that are directly
connected to the corresponding KVM switch. For example, a computer connected to a KVM
switch with BANK 01 will not be able to access the USB 2.0 devices connected to the KVM
switch with BANK 00.
9
ConnecttheincludedpowersuppliestotheDCpowerjacksonthebackoftherst-and
second-levelKVMswitches,thenplugthemintoaTrippLiteSurgeProtector,PowerDistribution
Unit(PDU),UninterruptiblePowerSupply(UPS),orwall-outlet.
10
Poweronallconnecteddevices.
Pushbutton Commands
Toaccessandswitchbetweenconnectedcomputersviapushbuttoncommands,simplypressthe
desiredfront-panelpushbuttontotogglethefocusoftheKVM,audioandUSBhubportstothe
desiredcomputer.
Keyboard Hotkey Commands
Anotherwaytoswitchbetweenconnectedcomputersistousekeyboardhotkeycommands.Besides
allowingyoutoswitchcomputers,hotkeycommandsenableyoutoperformotherfunctions,such
asbinding/unbindingcomputerswitchingwiththeUSBhubports,initiateanautoscan,andmore.
Thetablebelowliststheavailablehotkeycommandsandtheirfunctions.Hotkeycommandsare
performedbypressingeachkeyinthesequenceinsuccession.
Command Hotkey Sequence Description
SelectComputer
(InasingleKVM
installation)
[ScrollLock][ScrollLock][yz]
yz = 2-digit port number
(e.g. 01, 02, etc.)
SwitchesfocusoftheKVM,Audio,
andUSBHubportstotheselected
computer.Forexample,acommand
of[ScrollLock][ScrollLock][05]will
switchtoport5oftheKVMswitch.
SelectComputer
(InacascadedKVM
installation)
[ScrollLock][ScrollLock][ab][yz]
ab = 2-digit BANK number
yz = 2-digit port number
SwitchesfocusoftheKVM,Audio,
andUSBHubportstotheselected
KVMswitchandcomputer.For
example,acommandof[ScrollLock]
[ScrollLock][01][04]willswitchto
port4oftheBANK01KVMswitch.
DeneHotkey
PrecedingSequence
[ScrollLock][ScrollLock][H][x]
x = [F12], [Num Lock], [Caps
Lock], or [Scroll Lock]
Changesthehotkeypreceding
sequenceto[F12],[NumLock],
[CapsLock],or[ScrollLock].
UnbindKVMand
USBHub
Functionality
[ScrollLock][ScrollLock][X] UnbindstheKVMandUSBHub
functionality.Onceunbinded,
switchingcomputerswillonlytransfer
theKVMandAudiofunctionality.The
USBHubfunctionalitywillremainon
thecomputerportitwasonwhenit
wasunbinded.TheKVMandUSBHub
functionalityarebindedtogetherby
default.
14-03-102-933345.indd 6 4/2/2014 10:43:33 AM