Owner`s manual

62
Port Operation
Skip Mode
Skip Mode allows you to switch ports in order to monitor the computers via the keyboard. As opposed to Auto Scan Mode, you can dwell on
a particular port for as long or as little as you like. To access Skip Mode, you must first open up the OSD Toolbar by hitting the hotkey [Scroll
Lock or Ctrl] twice. When the OSD Toolbar is opened, the actions in the table below can be performed.
Hotkey Action
Skips from the current port to the first accessible port previous to it.
Skips from the current port to the first accessible port that comes after it.
Skips from the current port to the very first accessible port on the installation.
Skips from the current port to the very last accessible port on the installation.
When in Skip Mode, ordinary keyboard and mouse operations are not accessible. To exit Skip Mode and gain control of the selected port, hit the
[Esc] key or click on the X icon in the OSD Toolbar.