Owners manual

21
2. Web Configuration Interface
6. WhentheSSLcerticatehasbeeninstalled,apromptappearstoletyouknowtheinstallationwassuccessful,andthattheKVMwillbe
rebooted. Click the OK buttontoexittheWebCongurationInterfaceandreboottheKVM.
2.4.4 Device
The Device tab in the Configuration sectionallowsadministratorstoconguretheKVM’sDevice ID, LAN, and SNMP settings. The settings in
this page are described in the following section.
Conguring the Device ID settings:
• Device Name – The Device Name eldallowsyoutoassignanametotheNetCommanderIP.Bydefault,theDevice Name consists of the
letter‘D’followedbya6-digitdevicenumber,whichisprintedonthelabelontheundersideoftheKVM.IftheDHCPserverispublished
intheDNSserver,youcanconnecttotheNetCommanderIPsystemusingthedevicename,asfollows:https://DeviceName.Simplytype
in the desired Device Name and click the Save icon at the top of the page. Upon clicking Save, you will be prompted to reboot the KVM to
finish implementation of the new Device settings. Click Yes to proceed.
• TCP Port – The TCP Port referstotheportthattheKVM’ssessiondataissentthroughandreceived.Thiseldallowsyoutoselectaport
whichtherewallorroutersecurityaccesslistmustenableinboundtrafcthroughfortheKVM’sIPaddress.Forclientcomputeraccess
fromasecuredLAN,theselectedportshouldbeopenforcommunication.Youcanselectanyportfrom800to65535.ThedefaultTCP
port is 900, and the default https port is 443. Simply type in the desired TCP Port and click the Save icon at the top of the page. Upon
clicking Save, you will be prompted to reboot the KVM to finish implementation of the new Device settings. Click Yes to proceed.
Conguring the IPv4 LAN Settings
•Enable DHCP – By default, the Enable DHCP checkbox is checked, allowing for an IP address to be automatically assigned
 byaDHCPserver.ToassignaxedIPaddressofyourown,uncheckthischeckbox.
•MAC Address–TheMACAddresselddisplaystheKVM’sMACaddress,whichcanbeusedwhenlocatingtheIPaddress 
 assignedtotheKVMbyaDHCPserver.TheMACaddressisalsolocatedonthebottompaneloftheKVMswitch.
•IP Address–WhentheEnable DHCP checkbox is unchecked, this field becomes available for editing. Enter in an IP
address appropriate for your network.
•Subnet Mask–WhentheEnable DHCP checkbox is unchecked, this field becomes available for editing. Enter in a Subnet
Mask appropriate for your network.
•Default Gateway–WhentheEnable DHCP checkbox is unchecked, this field becomes available for editing. Enter in a
 DefaultGatewayappropriateforyournetwork.
•WheninDHCP mode, check the checkbox next to DNS Server tomanuallyassignanaddress.WhentheEnable DHCP
checkbox is unchecked, a DNS Servermustbemanualassigned.EnteraDNSserveraddressappropriateforyournetwork.
•AftermakinganychangestotheKVM’sLANsettings,clickontheSavebuttonatthetopofthescreentosavethem
Upon clicking Save, you will be prompted to reboot the KVM to finish implementation of the new Device settings.
 ClickYestoproceed.
Conguring the IPv6 LAN Settings
•Enable IPv6 – By default, the Enable IPv6 checkbox is checked. To disable IPv6, uncheck this checkbox.
•Mode – By default, the DHCP check box is checked, allowing for an IP address to be automatically assigned by a DHCP
server. The Mode section also provides you the options of automatically assigning a Stateless address and manually
assigning a Static address. Check the checkbox of the method you wish to use for IP address assignment.
•IPv6 Address–WhentheStatic mode checkbox is checked, this field becomes available for editing. Enter in an IP address
appropriate for your network.
•Subnet Prex Length–WhentheStatic mode checkbox is checked, this field becomes available for editing. Enter in a
Subnet Prefix Length appropriate for your network.
•Default Gateway–WhentheStatic mode checkbox is checked, this field becomes available for editing. Enter in a Default
 Gatewayappropriateforyournetwork.
14-03-051 93-32D5.indd 21 3/14/2014 9:52:27 AM