Owner`s manual

10
10
6.3 On-Screen Display (OSD) F2 SETTINGS
(
continued
)
Hotkey By default, the hotkey used in keyboard hotkey commands and to open the
OSD is the [Shift] key, but this can be changed to any of the four options
below. To toggle between commands, highlight the Hotkey option and press
the [Spacebar] key.
(SH-SH)
• Pressandreleasethe[Shift]keytwicetoopentheOSD.
• Pressandreleasethe[Shift]key,andthenpressandreleasetheplus
[+] key to switch to the next accessible port.
• Pressandreleasethe[Shift]key,andthenpressandreleasetheminus[-]
key to switch to the previous accessible port.
(CL-CL)
• PressandreleasetheLeft[Ctrl]keytwicetoopentheOSD;or,pressand
release the Right [Ctrl] key, and then press and release the Left [Ctrl] key.
• Pressandreleaseeither[Ctrl]key,andthenpressandreleasetheplus
[+] key to switch to the next accessible port.
• Pressandreleaseeither[Ctrl]key,andthenpressandreleasetheminus
[-] key to switch to the previous accessible port.
(CLF11)
• Pressandreleaseeither[Ctrl]key,andthenpressandreleasethe[F11]
key to open the OSD.
• Pressandreleaseeither[Ctrl]key,andthenpressandreleasetheplus
[+] key to switch to the next accessible port.
• Pressandreleaseeither[Ctrl]key,andthenpressandreleasetheminus
[-] key to switch to the previous accessible port.
(PRSCR)
• Pressandreleasethe[PrintScreen]keyoncetoopentheOSD.
• Whenyouchoose[PrintScreen]asyourhotkey,thekeyboardhotkey
commands are disabled, leaving the OSD as the only way to access the
connected computers.
Autoskip By default, the Autoskip setting is enabled, which prevents users from ac-
cessingportsthateitherdon’thaveacomputerconnectedtothem,orthat
have a powered-off computer connected to them. To toggle this setting on/
off, highlight it and press the [Spacebar] key.
Serial Port By default, the Serial Port setting is enabled, which allows a local firmware
upgrade to be performed. To toggle this setting on/off, highlight it and press
the [Spacebar] key. Note: This setting affects the firmware upgrade port
only, and has nothing to do with the Serial port on the back of the unit.
Keyboard Language By default, the Keyboard Language setting is set to US English, but it can
bechangedtoFrench (FR) or German (DE). To toggle between these three
language settings, highlight the Keyboard Language setting and press the
[Spacebar] key.
Switch Name By default, the switch name is NETCOMMANDER 16IP, but this can be
changed. Simply move the OSD cursor to the Switch Name and type in the
desiredname.Deleteanycharactersthatyoudon’twant.TheSwitch Name
canbeupto18charactersinlength,withspacescountingascharacters.
F7–Defaults YoucanrestorethedefaultsettingsofthelocalOSDbypressingthe[F7]
key. When pressed, you will be prompted to confirm that you wish to con-
tinue. If yes, press the [Y] key to restore the default values. Note: All of the
local OSD settings, including Security and User Settings, will be restored.
6. Operation (continued)
14-03-231-933350.indd 10 3/27/2014 4:38:37 PM