Owner`s manual
14
14
7.5 Current Firmware Verification
(
continued
)
3. When installation is complete, clicking the Finish buttonwillautomaticallyopentheFirmware
Upgrade Utility with the main screen displayed.
4. There are three types of firmware to be verified; OSD, Manager and SIU. Start by checking the
NetCommander CAT5 KVM Switch OSD box at the top of the utility, and then click the F/W Version
button at the bottom of the utility to display the firmware version number. Check this against the
firmware you downloaded from the Tripp Lite website to determine if an upgrade is needed.
7. Firmware Upgrade (continued)
Figure 7-2: Firmware Upgrade Utility Main Screen
Figure 7-3: OSD Verification
14-03-231-933350.indd 14 3/27/2014 4:38:38 PM