Owner`s manual

6
5. Installation (continued)
Figure 5.5.1 NetCommander PS/2 Server Interface Unit
SIU = Server Interface Unit
5.5.1 PS/2 Server Interface Unit
Connecting a NetCommander PS/2 Server Interface Unit (B078-101-PS2)
1. ShutdownthecomputerbeingconnectedtotheB078-101-PS2(SIU)
2. ConnecttheB078-101-PS2VGAconnectortothecomputersVGAport
3. ConnecttheB078-101-PS2PS/2KeyboardconnectortothecomputersPS/2Keyboardport
4. ConnecttheB078-101-PS2PS/2MouseconnectortothecomputersPS/2Mouseport
5. ConnectoneendoftheCat5e/6patchcabletotheRJ45portontheB078-101-PS2*
6. ConnecttheotherendoftheCat5e/6patchcabletothedesiredRJ45CPUport*
7.Repeat these steps for each additional PS/2 computer/server you are connecting to the KVM
*Cat5e/6cableshouldbenolongerthan100ft.
Up to 100 ft.
SIU
To computer's
mouse port
To computer's
keyboard port
To computer's
VGAport
1. Plug in the KVM. Use only the power cord supplied with the unit.
2. Switch ON the computers.
5.6 Connecting the Power Supply
Connecting a NetCommander USB Server Interface Unit (Model # B078-101-USB-1)
1. ConnecttheB078-101-USB-1VGAconnectortothecomputersVGAport
2. ConnecttheB078-101-USB-1USBconnectortothecomputersUSBport
3. ConnectoneendoftheCat5e/6patchcabletotheRJ45portontheB078-101-USB-1*
4. ConnecttheotherendoftheCat5e/6patchcabletothedesiredRJ45CPUport*
5. Repeat these steps for each additional USB computer/server you are connecting to the KVM
*Cat5e/6cableshouldbenolongerthan100ft.
Figure 5.4.2 NetCommander USB Server Interface Unit
SIU = Server Interface Unit
5.5.2 USB Server Interface Unit
Up to 100 ft.
ToVGAport To USB port
14-03-231-933350.indd 6 3/27/2014 4:38:35 PM