Owners manual

23
2. Web Configuration Interface
3. In PDU Name,typeanappropriatenameforthePDUyouareadding.
4. The Type drop-downmenuprovidesalistofPDUsthataresupportedbytheNetCommanderIP.SelectyourPDUfromthislist.Basedon
yourselection,thenumberofPDUoutletsisdisplayedintheOutlets field.
5. Inthe Addresssection,enterinthetypeofIPAddressappropriateforyourPDU; IPv4, IPv6, or Host. Note: When using a host name for
an IPv6 address, add the prefix udp6: to it. For example, a host name of host1 should be inputted as udp6:host1.
6. Click OK.ThePDUisaddedtothePower Devices page.
7. Click the Save button at the top of the screen to save your changes.
To Edit an existing PDU:
1. In the Power Devicespage,selectaPDUfromthelistandclicktheEdit button. The Edit PDU page appears.
2. UpdatethePDU Name, Type, and/or IPeldsasrequired.
3. Click OK. The Power Devices page opens with the modified information.
4. Click the Save button at the top of the screen to save your changes.
To Delete a PDU:
1. In the Power Devicespage,selectaPDUfromthelistandclicktheDelete button. A prompt appears asking you to confirm the deletion
oftheselectedPDU.
2. Click Yes. The Power Devicespageopens,andthePDUnolongerappearsinthelist.
3. Click the Save button at the top of the screen to save your changes.
14-03-053 93-3261.indd 23 3/14/2014 1:38:03 PM