Owners manual

28
2. Web Configuration Interface
• ToaddanLDAP/Sservertothelist,clickontheAdd button to bring up the Add LDAP Server screen.
• Enter the IPv4, IPv6, or HostaddressforyourLDAP/Sserverinthecorrespondingeld.
• Select the Port numberthatisusedbytheserver.Thedefaultportnumberis389forLDAP/TLSserversand636forLDAPSservers.
• Select from one of three encryption methods to use: No encryption, SSL, or TLS extension.
• Click the OK button to add the server to the list.
• Servers can be edited or deleted by highlighting them in the list and clicking on Edit or Delete. They can be re-ordered according to their
priority by highlighting them and clicking on Up or Down to move them in the list.
Search – The SearchsectioniswhereyousettheaccountDNthatisusedtoquerytheLDAP/Sserver,andwhereinthedirectorytosearch
duringauthentication.ReferencethefollowingscreenshotsanddescriptionsoftheSearch fields when adding this information.
• Search DN – The Search DNeldshouldbepopulatedwiththevalueoftheDistinguishedNameattributefortheuseraccountthatis
beingusedtoquerytheActiveDirectory.
14-03-053 93-3261.indd 28 3/14/2014 1:38:05 PM