Owners manual

33
3. Conducting a Remote Session
A remote session allows accounts IP access to computer/servers and serial devices connected to the KVM. In a remote session, accounts
can access computers/servers, power cycle or turn power to a Target Server Off/On, virtually mount an .iso file, and configure the remote
session settings. The sections that follow explain the features of a remote session, and how to use them.
3.1 Starting a Remote Session
To start a remote session:
1. Open the Web Configuration Interface, and click on the icon in the menu bar. The My Targets screen appears, displaying
onlythoseportsthatthelogged-inaccountispermittedtouse.Foradministratoraccounts,agraphicoftheKVM’sbackpanelis
displayed in between the Toolbar and Data Pane.
2. A remote session can be initiated in one of four ways:
• Select a port from the Data Pane of the My Targets screen, and click on the Display icon in the toolbar.
• Select a port from the Data Pane of the My Targets screen, and press the [Enter] key.
• Double-clickonaportintheData Pane of the My Targets screen.
• Administrator’s Only – Double-clickonaportinthegraphicoftheKVM’sback-panel.
Note: A Target Server with a RemoteExclusiveSessionorLocalExclusiveSession status is being accessed by another account in
Exclusive Mode (see the Exclusive Session section in this manual for details), and cannot be accessed. A Target Server with a Remote
Session status is being accessed by another account in Share Mode, which allows for up to 5 users to access the port at the same time
(see the Sharing a Remote Session section in this manual for details).
3. Uponinitiatingaremotesessioninoneofthesefourways,thescreenoftheselectedTargetServerappearsinsidearemoteconsole
window with the remote session toolbar displayed.
14-03-053 93-3261.indd 33 3/14/2014 1:38:07 PM