Owners manual

4. Local Console

This chapter explains how to operate the NetCommander IP via the local console. The local console allows you to access connected

computer/servers,conguretheKVM’snetworksettings,andtoconguresomemorebasicsettingsspecictolocalaccess.

To display the OSD:

1. From the local keyboard, press the left Shift key twice. The

OSDMainwindowappears.

Lines with sun icons in the PM column show active computers/

servers. A computer that is connected, but is powered-off, does

not have a sun icon. When a server is busy (when an account is

accessing it in an Exclusive Session), the entire line appears in red

characters.

Navigating the OSD:

• To move the highlight bar throughout the list, press the [h] and [i] arrow keys.

• To jump from one column to the next (when relevant), press the [Tab] key.

• ToexittheOSDorreturntoapreviouswindowwithintheOSD,pressthe[Esc]key.

To select a computer:

1. Navigate to the desired port using the [h] and [i] arrow keys, or type the two-digit port number of the desired computer.

2. Press the [Enter] key. The selected computer is accessed.

4.1 Move Label (F1)

When a Target Server is accessed via the local console, a Conﬁrmation Label appears brieﬂy, displaying the port number and name of the

Target Server being accessed. After a few seconds, the Conﬁrmation Label disappears.YoucanpositiontheConﬁrmation Label anywhere on

thescreenusingtheOSD’sMOVE LABEL (F1) function.

1. OpentheOSDandhighlightthedesiredcomputerusingthe[h] and [i] arrow keys.

2. Pressthe[F1]key.Theselectedport’svideoandConﬁrmation Label appear.

3. Usethearrowkeystomovethelabeltoadesiredpositiononthescreen.

4. Press the [Esc] key to save the position and exit.

4.2 Tuning (F5)

YoucantunetheimageofanyTargetServerusingtheOSD’sTUNING (F5) function.

1. OpentheOSDandhighlightthedesiredcomputerusingthe[h] and [i] arrow keys.

2. Pressthe[F5]key.Theselectedport’svideoandtheImage Tuning Label appears.

3. Usethe[h] and [i] arrow keys to adjust the image.

4. When the image is satisfactory, press the [Esc] key.

14-03-053 93-3261.indd 44 3/14/2014 1:38:13 PM