Server User Manual

ManualsBrandsTripp Lite ManualsNetwork CardB095-003-1E-M

Quick Start Guide

Warranty

Registration:

chance to win a FREE Tripp Lite

product—www.tripplite.com/warranty

B095-003-1E-M and B095-004-1E

1111 W. 35th Street, Chicago, IL 60609 USA

www.tripplite.com/support

This Quick Start walks you through installation, conﬁguration and local operation. For more details

please refer to the User Manual on the CD-ROM.

Check Kit Contents

B095 Console Server UTP Cables (2) and

DB9F-RJ45F Straight

and Cross-Over

Adapters

Quick Start Guide &

CD-ROM

AC Power Adapter

Connect the Hardware

• Plugtheconsoleserverintoapowersupply(PDU,surgeorUPS)usingtheprovidedACpower

adapter.

• ConnecttheNETWORK port on the console server to your network, connect your serial devices

to any of the console server’s SERIAL ports.

• Forout-of-band(OoB)dial-inaccessontheB095-003-1E-M,connecttheinternalMODEM

porttothephoneline.Forout-of-band(OoB)dial-inaccessontheB095-004-1E,youcan

connect an external modem to either the USB Type A port or one of the serial ports.

201102195 93-2977.indd 1 3/1/2011 11:05:14 AM

Summary of content (4 pages)

PAGE 1
ty n: r a ite ty an tio ay fo ipp L rran r ar ra d Tr wa W ist ne to EE om/ g nli FR e.c Reter o in a ipplit w .tr s gi o re ce t ww w an — ch uct od pr Quick Start Guide B095-003-1E-M and B095-004-1E This Quick Start walks you through installation, configuration and local operation. For more details please refer to the User Manual on the CD-ROM.
PAGE 2
Setup the B095 Console Server The default console server IP address is 192.168.0.1 (subnet mask 255.255.255.0). With a web browser on any computer that is LAN connected to the console server: • Enter https://192.168.0.1 into the address bar. • Log in using the default system user name root and the default password default, a Welcome screen listing the basic configuration steps is displayed. • Select System: Administration, enter and confirm a new System Password and click Apply.
PAGE 3
Add New Users Note: It is recommended that you set up a new Administrator user (in the admin group with full access privileges) and login as this new user for all ongoing administration functions (rather than continuing as root). • For each new user, select Serial & Network: Users & Groups and click Add User. • Enter a Username and enter and confirm a Password, and nominate the Accessible Hosts and Ports the user is allowed to access, then click Apply.
PAGE 4
Advanced Configurations continued • Other advanced features, such as Serial Port Cascading, remote Authentication, Trusted Networks, Secure Tunneling, Nagios Distributed Monitoring, the Command Line interface – these are covered in detail in the User Manual on the CD-ROM. Note: On the CD-ROM you will also find the SDT Connector software tool which provides you with secure, point and click access to the console server and all the attached devices. Refer to SDTConnector Quick Start for set up details.