Specification
HDMI over Cat5/Cat6 Active Extender, Box-Style
Remote Receiver for Video and Audio, 1080p @ 60
Hz, Up to 200-ft., TAA
MODEL NUMBER: B126-1A0
Description
The B126-1A0 HDMI over Cat5/Cat6 Active Remote Receiver works with Tripp Lite’s B126-002 or B126-004
transmitter to extend an HDMI signal to a projector, monitor or television. It’s ideal for digital signs, trade shows,
presentations, classrooms, churches, retail settings and other applications where the video source is located
farther than conventional cables allow or that require multiple displays connected to one source.
The receiver uses HDMI cable (see Tripp Lite’s P568-Series) to connect to the monitor and Cat5e/6 cable to
receive the signal from the transmitter or a remote repeater in the chain (for best results, use 24 AWG solid-wire
Cat5e/6 cable, such as Tripp Lite’s N202-Series).
The B126-1A0 can extend a 1080i (60 Hz) signal up to 200 feet, a 1080p (60 Hz) signal up to 150 feet and a 3D
signal up to 125 feet. You can connect up to three B126-110 remote repeaters in the chain for a total of four HDMI displays and full signal extension of 700 feet
(1080i), 500 feet (1080p) or 400 feet (3D).
In addition to crystal-clear video, the B126-1A0 delivers full, rich stereo and 7.1-channel surround sound (multi-channel or PCM) audio when paired with a
B126-Series transmitter. Built-in equalization control lets you fine-tune the image quality at each remote display. Supports 24-bit True Color (8 bits per channel)
and HDCP compatibility. Easy to set up with no software or drivers to install. Mounts to a wall, rack or pole using the included hardware.
Features
Extends High-Definition Signals
Works in tandem with Tripp Lite’s B126-002 or B126-004 transmitter unit
Extends a 1080i (60 Hz) signal up to 200 ft., a 1080p (60 Hz) signal up to 150 ft. and a 3D signal up to 125 ft.
Connect up to 3 B126-110 remote repeaters to the chain for maximum signal range of 700 feet (1080i), 500 feet (1080p) and 400 feet (3D)
Connects to previous link in the chain with one Cat5e/6 cable (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite’s N202-Series)
Highlights
Works in tandem with B126-002
or B126-004 transmitter unit
Supports high-definition video
resolutions up to 1080p (60 Hz)
Supports stereo and 7.1-channel
surround sound audio
Works with all operating systems
and HDMI video sources
Plug and play—no software or
drivers to install
System Requirements
For international use, the
B110-INT power supply can be
purchased separately; it features
plugs for the UK, Europe, and
Australia
Package Includes
B126-1A0 HDMI over Cat5/Cat6
Active Remote Receiver
Screwdriver for adjusting
equalization
External Power Supply with
NEMA 1-15P Plug (Input:
100–240V, 50/60 Hz, 0.5A;
Output: 5V, 2A, 5 ft.)
Mounting hardware
Owner’s Manual
1 / 3