Owner`s manual

Installation

Extender Kit Installation (B130-101, B130-101A,

B130-101-WP-1, B130-101A-WP-1, B130-101S, B130-101-U)

Note:

1. The diagram above shows a B130-101A VGA + Audio Extender Kit installation.

Installation will be the same for other extender kit models, with the exception of

units featuring VGA + Audio, VGA + RS232 serial or VGA only. The B130-101-U

gets power from the USB cable built-in to the local unit, and doesn’t require external

supplies.

2. Test to make sure the entire installation works properly before pulling cables through

ceilings/walls.

3. To achieve maximum distance and performance, 24Awg solid wire Cat5e/6 cable

must be used. The use of stranded wire Cat5e/6 cable, or cable with a gauge (Awg)

size higher than 24Awg, will result in shorter extension distance. All Tripp Lite N202-

Series cables are made with 24Awg solid wire cabling. Tripp Lite N022-01K-GY

(Cat5e) and N222-01K-GY (Cat6) are 24Awg solid wire bulk cables. For optimal

image quality between 500 and 1,000 ft., use Zero-Skew cable, such as Tripp Lite

P524-01K. For the B130-101-U, use Zero-Skew cable for distances between 250

and 500 ft.

4. To achieve maximum resolution, it is recommended that you use Tripp Lite P502-

Series VGA Video or P504-Series VGA Video and Stereo Audio cables with RGB coax.

*If this is a feature of your extender kit.

Local Unit

Remote Unit

201105276 933064-EN.indd 12 6/17/2011 12:24:18 PM