Owner`s manual

Installation continued

Non-Kit Daisychain Installation

(B132-004-1 and B132-004A only)

Note:

1. The diagram above shows a B132-004A VGA + Audio Extender/Splitter Kit daisychain

installation. Installation will be the same for non-Audio models, except that an Audio

source and speakers will not be connected.

2. Test to make sure the entire installation works properly before pulling cables through

ceilings/walls.

3. To achieve maximum distance and performance, 24Awg solid wire Cat5e/6 cable

must be used. The use of stranded wire Cat5e/6 cable, or cable with a gauge (Awg)

size higher than 24Awg, will result in shorter extension distance. All

Tripp Lite N202-Series cables are made with 24Awg solid wire cabling.

Tripp Lite N022-01K-GY (Cat5e) and N222-01K-GY (Cat6) are 24Awg solid wire bulk

cables. For optimal image quality between 500 and 1,000 ft., use Zero-Skew cable,

such as Tripp Lite P524-01K.

4. To achieve maximum resolution, it is recommended that you use Tripp Lite

P502-Series VGA Video or P504-Series VGA Video and Stereo Audio cables with RGB

coax.

Source PC

Local PC and

Speakers (Optional)

B132-100A-WP-1

B132-004A

B132-100A

201105276 933064-EN.indd 17 6/17/2011 12:24:19 PM