Manualshelf

Owner`s manual

ManualsBrandsTripp Lite ManualsAV extendersB130-101-WP-1
11121314151617181920
18
1
Make sure that the VGA and Stereo Audio* source is powered off.
2
Connect the VGA and Stereo Audio* source to the INPUT port(s) on the
local unit (B132-004-1 or B132-004A) using a VGA and Stereo Audio*
cable.
3
Using the included daisychain cable, connect the LOCAL port(s) on the
B132-004-1 or B132-004A to the INPUT ports on a second level B132-
004-1 or B132-004A.
Note: A standard VGA cable can be used to increase the distance between units
with no more than 6 ft. between.
4
Repeat step 3 for each additional local unit you are adding to the
daisychain, with no more than 6 local units in the entire installation.
5
(Optional) – Connect a local monitor and speakers* to the LOCAL port(s)
of the last B132-004-1 or B132-004A in the daisychain using a VGA and
Stereo audio cable.
6
Connect the external power supply to the first local unit in the installation,
and then plug it into a Tripp Lite Surge Suppressor, Power Distribution Unit
(PDU) or Uninterruptible Power Supply (UPS).
7
Repeat step 6 for each additional local unit in the installation.
8
UsingCat5e/6cable,connectanavailableRJ45OUTPUT port on the local
unittotheRJ45INPUT port on a remote unit (B132-100-1, B132-100A,
B132-100-WP-1 or B132-100A-WP-1).
9
Repeat step 8 for each remote unit you are connecting to the installation.
10
Connect a monitor and speakers* to the OUTPUT ports on the remote
unit using a VGA and Stereo Audio* cable.
11
Repeat step 10 for each remote unit in the installation.
12
Connect the external power supply to the remote unit, and then plug
it into a Tripp Lite Surge Suppressor, Power Distribution Unit (PDU) or
Uninterruptible Power Supply (UPS).
13
Repeat step 12 for each remote unit in the installation.
14
Turn on the power to the monitor and speakers.*
15
Turn on the power to the monitor and audio* source.
16
Ifnecessary,adjusttheEqualization and Gain controls using the included
screwdriver to improve the video image.
Installation continued
*If this is a feature of your extender kit.
201105276 933064-EN.indd 18 6/17/2011 12:24:19 PM