Owner`s manual

22
Installation continued
Non-Kit Remote/Repeater Installation
*If this is a feature of your extender kit.
Note:
1. The diagram above shows a B132-004-1 installation with the maximum number of
remote units connected. A B132-004A installation will be the same, except there will
be audio connections. B132-002-1 and B132-002A local units come with 2 ports
instead of 4, and do not feature additional ports for a local monitor and speakers.*
2. A 1024 x 768 (60Hz) signal can be extended up to 1,000 ft. between the local
transmitter and the first remote/repeater unit in the installation. Up to an additional
1,000 ft. can be placed in between the first remote/repeater unit and the last display
in the installation, for a maximum extension distance of 2,000 ft. Up to 4 remote
units (3 remote/repeaters and 1 receiver) can be connected together to transmit a
signal to up to 4 points in a 2,000 ft. chain.
3. Test to make sure the entire installation works properly before pulling cables through
ceilings/walls.
201105276 933064-EN.indd 22 6/17/2011 12:24:20 PM