TY N for a Lite nty AN TIO ay ripp arra R A od T /w AR TR t EE m W IS nline FR .co G o a ite RE ter win ippl r s gi to .t Re ce www n a t ch duc o pr Owner’s Manual DVI Over Cat5 Dual Display Extender / Splitter Model: B140-002-DD Package Contents 2 Product Features 2 Mounting 3 Standard Installation 4 Remote Repeater Installation 6 Troubleshooting 8 Warranty & Warranty Registration 11 1111 W. 35th Street, Chicago, IL. 60629 • www.tripplite.
Package Contents • B140-002-DD Extender / Splitter Transmitter Unit • External Power Supply (Input: 100-240V, 50/60Hz, 0.5A Output: 5V, 2A) • Mounting Hardware • Owner’s Manual Product Features • Transmits a DVI-D Single-Link signal from a set of Dual DVI inputs to two sets of Dual Displays • A B140-Series remote receiver is needed at each monitor • For longer distances: Use a B140-1A0 or B140-1A0-WP active receiver to extend a 1920 x 1080 @ 60Hz signal up to 150 ft.
Product Features Optional Accessories: • B140-1A0 DVI Over Cat5 Extender – Active Remote Receiver Unit • B140-1A0-WP DVI Over Cat5 Extender – Active Remote Receiver Wallplate • B140-1P0 DVI Over Cat5 Extender – Passive Remote Receiver Unit • B140-1P0-WP DVI Over Cat5 Extender – Passive Remote Receiver Wallplate • B140-110 DVI Over Cat5 Extender – Remote Repeater Unit • N202-Series Cat6 24AWG, Solid Wire Patch Cables • P561-Series DVI-D Single-Link Cables • P566-Series DVI to HDMI Adapter Cables* * When conv
Standard Installation Note: 1. Test to make sure that the entire installation works properly before pulling cables through ceilings/walls. 2. 24AWG, Solid Wire Cat5e/6 cable, such as Tripp Lite’s N202-Series, is required to achieve maximum distance and resolution. 3. The signal from input port A is transmitted to RJ45 output ports 1A and 2A. The signal from input port B is transmitted to RJ45 output ports 1B and 2B.
Standard Installation 5 Using Cat5e/6 cable, connect RJ45 port 1A to a B140-Series remote receiver unit. 6 Repeat step 5 to connect each RJ45 port to a B140-Series remote receiver unit. 7 B140-1A0 and B140-1A0-WP only: Connect the external power supply to the active receiver unit, and plug it into a Tripp Lite Surge Suppressor, PDU, or UPS. When receiving power, the Green RJ45 LED on the B140-1A0, and the Green Power LED on the B140-1A0-WP, will illuminate.
Remote Repeater Installation Note: 1. Test to make sure that the entire installation works properly before pulling cables through ceilings/walls. 2. 24AWG, Solid Wire Cat5e/6 cable, such as Tripp Lite’s N202-Series, is required to achieve maximum distance and resolution. 3. The signal from input port A is transmitted to RJ45 output ports 1A and 2A. The signal from input port B is transmitted to RJ45 output ports 1B and 2B.
Remote Repeater Installation 7 Connect the external power supply to the repeater and plug it into a Tripp Lite Surge Suppressor, PDU, or UPS. The Green Power LED and the Green RJ45 LEDs illuminate to indicate the unit is receiving power. Add up to 3 repeaters per channel, for a total of 4 displays (an active remote receiver should be the last unit in a channel). To connect additional repeaters, proceed to step 8. To finish your installation with a B140-1A0 or B140-1A0-WP receiver, proceed to step 11.
Remote Repeater Installation 14 Turn on the power to the DVI source. The Orange RJ45 LED’s on the B140-002-DD, B140-110, and B140-1A0, and the Orange Activity LED on the B140-1A0-WP, will illuminate. The video image should now be displayed on the connected monitors. 15 If necessary, use the Equalization control on the B140-110, B140-1A0, and/or B140-1A0-WP to adjust the video image. Note: An improper Equalization setting can cause the monitor not to display an image at all.
Troubleshooting 4 What resolution are you trying to reach? Tripp Lite’s DVI over Cat5 extenders are tested to support up to 1920 x 1080 @ 60Hz video resolution (See the Product Features section or the installation diagrams in this manual for details on max distance and resolution when using the repeater and the different receivers). The shorter the extension distance, the higher the resolution you will be able to obtain.
Troubleshooting 8 Check your cabling for any damages that may have occurred during installation. If a cable connector is loosened from pulling through ceilings/ walls, or the cable jacket is damaged causing the wiring to be exposed, you will not be able to achieve maximum performance. 9 Are the transmitter, repeater, and/or receiver located in an area that exposes them to higher temperatures? If the product is overheated, it will not function properly.
Warranty & Warranty Registration 1-Year Limited Warranty TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center.
Warranty & Warranty Registration WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union) Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and electronic equipment from Tripp Lite they are entitled to: • Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country) • Send the new equipment back for recycling when this ultimately becomes waste WARNIN
