Owner`s manual

12
4
UsingCat5e/6cable,connecttheRJ45portonthelocalunittothe
RJ45INPUTportontheB140-110remote/repeaterunit.
5
Connect a monitor to the DVI OUTPUT port on the remote/repeater
unitusingaTrippLiteP561-SeriesDVI-DSingle-LinkCable.
6
Connect the external power supply to the remote/repeater unit and
plugitintoaTrippLiteSurgeSuppressor,PDUorUPS.TheGreen
PowerLEDandtheGreenRJ45LEDsilluminatetoindicatetheunit
is receiving power.
Up to 4 units can be daisy-chained (3 remote/repeaters and 1 receiver).
Toconnectadditionalremote/repeaterunits,proceedtostep7.Tonish
your installation with the B140-101X or B140-1A1-WP remote receiver
unit, proceed to step 11.
7
UsingCat5e/6cable,connecttheRJ45OUTPUTportontherst
remote/repeaterunittotheRJ45INPUTportonasecondremote/
repeater unit.
8
Connect a monitor to the DVI OUTPUT port on the remote/repeater
unitthatyoujustaddedusingaTrippLiteP561-SeriesDVI-D
Single-Link Cable.
9
Connect the external power supply to the remote/repeater unit and
plugitintoaTrippLiteSurgeSuppressor,PDUorUPS.TheGreen
PowerLEDandtheGreenRJ45LEDsilluminatetoindicatetheunit
is receiving power.
10
To add a third remote/repeater unit, repeat steps 7 through 9.
TonishyourinstallationwiththeB140-101XorB140-1A1-WP
remote receiver unit, proceed to step 11.
Extender Kit with Remote/Repeater
Installation (B140-101X and B140-1A1-WP extender kits only)
201110026-93-3094-EN.indd 12 11/3/2011 11:37:09 AM