Owner`s manual

B140-004
B140-1A0
B140-1P0
B140-1A0-WP-1
Up to 200 ft. at 1024 x 768 (60Hz)
Up to 150 ft. at 1920 x 1080 (60Hz)
Up to 100 ft. at 1024 x 768 (60Hz)
Up to 50 ft. at 1920 x 1080 (60Hz)
Up to 75 ft. at 1024 x 768 (60Hz)
Up to 50 ft. at 1920 x 1080 (60Hz)
DVI OVER Cat5
EXTENDER
REMOTE UNIT
MODEL: B140-1P0
B140-1P0-WP-1
14
Standard Extender/Splitter Installation
Notes:
1. The diagram below shows a B140-004 installation. Installation will
be the same when using a B140-002, except that the B140-002
has fewer RJ45 ports and no local monitor port.
2. Test to make sure that the entire installation works properly before
pulling cables through ceilings/walls.
3. To achieve maximum distance and performance, use 24 AWG solid
wire Cat5e/6 cable. Using stranded wire cable, or cable with a gauge
(AWG) size higher than 24 AWG, will result in lesser performance
and shorter extension distance. Tripp Lite N202-Series (Cat6) patch
cables are made with 24 AWG solid wire cabling.
201110026-93-3094-EN.indd 14 11/3/2011 11:37:10 AM