Owner`s manual

25
Extender/Splitter Daisy-Chain with Remote/
Repeater Installation (B140-004 extender/splitter,
and B140-1A0 and B140-1A0-WP remote receivers only)
Up to 4 units can be daisy-chained (3 remote/repeaters and 1 receiver).
To connect additional remote/repeater units, proceed to step 11. To
nishyourinstallationwithaB140-1A0orB140-1A0-WP-1remote
receiverunit,proceedtostep15.
11
UsingCat5e/6cable,connecttheRJ45OUTPUTportontherst
remote/repeaterunittotheRJ45INPUTportonasecondremote/
repeater unit.
12
Connect a monitor to the DVI OUTPUT port on the remote/repeater
unitthatyoujustaddedusingaTrippLiteP561-SeriesDVI-DSingle-
Link Cable.
13
Connect the external power supply to the remote/repeater unit and
plugitintoaTrippLiteSurgeSuppressor,PDUorUPS.TheGreen
PowerLEDandtheGreenRJ45LEDsilluminatetoindicatetheunit
is receiving power.
14
To add a third remote/repeater unit, repeat steps 11 through 13. To
nishyourinstallationwithaB140-1A0orB140-1A0-WP-1remote
receiverunit,proceedtostep15.
15
UsingCat5e/6cable,connecttheRJ45OUTPUTportonthelast
remote/repeaterunittotheRJ45INPUTportonaB140-1A0or
B140-1A0-WP-1 remote receiver unit.
16
Connect a monitor to the DVI OUTPUT port on the remote receiver
unitusingaTrippLiteP561-SeriesDVI-DSingle-LinkCable.
17
Connect the external power supply to the remote receiver unit and
plugitintoaTrippLiteSurgeSuppressor,PDUorUPS.TheGreen
RJ45LEDsontheB140-1A0andtheGreenLEDontheB140-1A0-
WP-1 illuminate to indicate that the unit is receiving power.
201110026-93-3094-EN.indd 25 11/3/2011 11:37:16 AM