Owners manual

18
Extender/Splitter with Remote/Repeater Installation
(B140-1A0 and B140-1A0-WP-1 remote receiver units only)
2
ConnecttheDVIsourcetotheINPUTportontheB140-002or
B140-004usingaTrippLiteP561-SeriesDVI-DSingle-LinkCable.
3
Optional for B140-004: Connect a local monitor to the DVI
OUTPUTportusingaTrippLiteP561-SeriesDVI-DSingle-LinkCable.
4
Connect the external power supply to the local unit and plug it into
aTrippLiteSurgeSuppressor,PDUorUPS.TheGreenRJ45LEDs
illuminate to indicate power is being received from the external
power supply. An additional Red LED on the B140-004 also
illuminates to indicate that power is being received.
5
UsingCat5e/6cable,connectoneoftheRJ45outputportsonthe
localunittotheRJ45inputportontheB140-110remote/repeater
unit.
6
Connect a monitor to the DVI OUTPUT port on the remote/repeater
unitusingaTrippLiteP561-SeriesDVI-DSingle-LinkCable.
7
Connect the external power supply to the remote/repeater unit and
plugitintoaTrippLiteSurgeSuppressor,PDUorUPS.TheGreen
PowerLEDandtheGreenRJ45LEDsilluminatetoindicatetheunit
is receiving power.
Up to 4 units can be daisy-chained (3 remote/repeaters and 1 receiver).
Toconnectadditionalremote/repeaterunits,proceedtostep8.Tonish
your installation with a B140-1A0 or B140-1A0-WP-1 remote receiver
unit, proceed to step 12.
8
UsingCat5e/6cable,connecttheRJ45OUTPUTportontherst
remote/repeaterunittotheRJ45INPUTportonasecondremote/
repeater unit.
9
Connect a monitor to the DVI OUTPUT port on the remote/repeater
unitthatyoujustaddedusingaTrippLiteP561-SeriesDVI-DSingle-
Link Cable.
201110026-93-3094-EN.indd 18 11/3/2011 11:37:12 AM