Owner`s manual

Standard Installation

Notes:

1. Test to make sure the entire installation works properly before pulling cables through

ceilings/walls.

2. To achieve maximum distance and performance, 24 AWG solid wire Cat5e/6 cable

must be used. The use of stranded wire Cat5e/6 cable, or cable with a gauge (AWG) size

higher than 24 AWG, will result in shorter extension distance. Higher gauge cabling, such

as 26 AWG, has a more limited transmission capability than lower gauge cabling. All

Tripp Lite N202-Series Cat6 cables are made with 24 AWG solid wire. Tripp Lite N022-

01K-GY (Cat5e) and N222-01K-GY (Cat6) are 24 AWG solid wire bulk cables used in

applications that require a 110 punchdown termination.

3. The included 110 Punchdown tool is provided for your convenience. For best results,

it is recommended that you use a professional 110 Punchdown Installation Tool, such as

Tripp Lite’s N046-000.

1. Make sure the DVI source is powered-OFF.

2. Connect the DVI source to the DVI port on the B140-002 or B140-004

labeled INPUT using a Tripp Lite P561-Series DVI-D Single-Link Cable.

3. Optional for B140-004: Connect a DVI monitor to the DVI port on the

B140-004 marked LOCAL using a Tripp Lite P561-Series DVI-D Single-

Link Cable.

B140-004

B140-1A0

B140-1A0-WP

B140-1P0

B140-1P0-WP

201007212 93-2986.indb 5 9/1/2010 3:48:11 PM