Owner`s manual

9
Daisy-Chain Installation (B140-004 only) continued
13. Repeat step 12 for each additional monitor you are connecting.
14. Turn on the power to the DVI source. The orange RJ45 LEDs illuminate
on the B140-004 and B140-1A0 and the orange LED illuminates on the
B140-1A0-WP to indicate the unit is receiving a signal from the source.
The screen should now be displayed on the connected monitors.
15. If necessary, use the Equalization control on the B140-1A0 or
B140-1A0-WP to adjust the video image. Note: If your monitor does not
display a picture at all, the Equalization control may need to be adjusted.
Try each Equalization setting until a picture is displayed.
201007212 93-2986.indb 9 9/1/2010 3:48:13 PM