User Guide

DVI over Cat5/Cat6 Active Extender, Box-Style
Remote Video Receiver, 1920x1080 at 60Hz
MODEL NUMBER: B140-1A0
Description
The B140-1A0 is a receiver unit that is used with the B140-002 and B140-004 extender/splitter transmitter units,
and it transmits a DVI-D Single-Link signal up to 200 ft. away using a single Cat5e/6 patch cable. To achieve
maximum distance and resolution, use 24AWG Solid Wire Cat5e/6 cable(Tripp Lite's N202-Series). The
B140-1A0 is compatible with all operating systems, and is plug and play, with no software or drivers required. It
features a built-in Equalization control for adjustment of the video image. Compliant with the Federal Trade
Agreements Act(TAA) for GSA Schedule purchases.
Installation is simple. Connect a B140-002 or B140-004 transmitter(not included) to a DVI source using a Tripp
Lite P561-Series DVI cable(not included). Connect the B140-1A0 to a display using a Tripp Lite P561-Series DVI
cable(not included). Finally, the receiver unit is connected to an RJ45 port on the transmitter unit using a single
Cat5e/6 cable. A 1920 x 1080 @ 60Hz signal can be extended up to 150 ft. from the source,, or a 1024 x 768 @
60Hz signal up to 200 ft.
Further expand the range and number of monitors by using a B140-110 repeater unit. Add up to four remote
units(three repeaters and one active receiver) to each channel of the B140-002 or B140-004, for a total of 4
displays per channel.(An active receiver should be the last unit in a channel) A 1920 x 1080 @ 60Hz signal can
be extended up to 125 ft. from each repeater to the next unit in the channel, or a 1024 x 768 @ 60Hz signal can
be extended up to 175 ft.
Features
Transmit a DVI-D Single-Link signal up to 200 ft. away using a single Cat5e/6 patch cable
For use with B140-002 or B140-004 extender/splitter transmitter units
Supports DVI-D Single-Link video resolutions up to 1920 x 1080 @ 60Hz
Extends a 1920 x 1080 @ 60Hz signal up to 150 ft., or a 1024 x 768 @ 60Hz signal up to 200 ft.
Use 24AWG, Solid Wire Cat5e/6 cable, such as Tripp Lite's N202-Series, to achieve maximum distance and
resolution
Highlights
For use with B140-002 or
B140-004 extender/splitter
transmitter units
Supports DVI-D Single-Link video
resolutions up to 1920 x 1080 @
60Hz
Extends a 1920 x 1080 @ 60Hz
signal up to 150 ft., or a 1024 x
768 @ 60Hz signal up to 200 ft.
Use 24AWG, Solid Wire Cat5e/6
cable, such as Tripp Lite's
N202-Series, to achieve
maximum distance and resolution
Can further expand the range
and number of monitors by
adding B140-110 repeaters
Compatible with all operating
systems
Plug and play, no software or
drivers required
Features a built-in Equalization
control for adjustment of the
video image
Compliant with the Federal Trade
Agreements Act(TAA) for GSA
Schedule purchases
System Requirements
For international use, the
B110-INT power supply can be
purchased separately; it features
plugs for the UK, Europe, and
Australia
Package Includes
B140-1A0 DVI over Cat5 Active
Extender Remote Unit
Mounting hardware
Screwdriver for adjustment of
Equalization
External Power Supply with
NEMA 1-15P Plug (Input:
100-240V, 50/60Hz, 0.5A Output:
5V, 2A)
1 / 2