Owner`s manual

26
18
Repeatsteps8through17foreachadditionalRJ45outputporton
the local transmitter units.
19
TurnonthepowertotheDVIsource.TheOrangeRJ45LEDson
the local transmitter, remote/repeater and B140-1A0 illuminate
to indicate a signal is being received from the source. The Orange
LED on the B140-1A0-WP-1 illuminates to indicate a signal is being
received from the source.
20
If necessary, use the Equalization control on the remote/repeater
unit(s) and remote receiver unit to adjust the video image. Note: An
improper Equalization setting can cause the monitor not to display
a picture at all. Try each Equalization setting until an acceptable
picture is displayed.
Extender/Splitter Daisy-Chain with Remote/
Repeater Installation (B140-004 extender/splitter,
and B140-1A0 and B140-1A0-WP remote receivers only)
201110026-93-3094-EN.indd 26 11/3/2011 11:37:17 AM