Log Splitter User Manual

ManualsBrandsTripp Lite ManualsLog SplitterB156-002-DVI

Owner’s Manual

DisplayPort Multi-Display

Splitter/Expanders

Models: B156-002, B156-002-DVI, B156-002-HDMI

1111 W. 35th Street, Chicago, IL. 60629 • www.tripplite.com/support

Product Features 2

Package Contents 2

Mounting Instructions 3

Installation Instructions 4

Troubleshooting 5

Warranty & Warranty Registration 7

WARRANTY

REGISTRATION

chance to win a FREE Tripp Lite

product www.tripplite.com/warranty

13-03-220-93323C.indd 1 3/19/2013 3:41:02 PM

Summary of content (8 pages)

PAGE 1
TY N for a Lite nty AN TIO ay ripp arra R A od T /w AR TR t EE m W IS nline FR .co G o a ite RE ter win ippl r s gi to .t Re ce www n a t ch duc o pr Owner’s Manual DisplayPort Multi-Display Splitter/Expanders Models: B156-002, B156-002-DVI, B156-002-HDMI Product Features 2 Package Contents 2 Mounting Instructions 3 Installation Instructions 4 Troubleshooting 5 Warranty & Warranty Registration 7 1111 W. 35th Street, Chicago, IL. 60629 • www.tripplite.
PAGE 2
Product Features • Split or expand a DisplayPort signal on two DisplayPort (B156-002), DVI (B156-002-DVI), or HDMI (B156-002-HDMI) monitors • Supports video resolutions up to 1920 x 1080 @ 60Hz (or 3840 x 1080 @ 60Hz when monitors are set to extended mode) • Supports 30-bit Deep Color (10-bits per channel) • Supports HDCP, EDID and DDC • B156-002-HDMI supports DTS-HD, Dolby True HD and 7.1 channel surround sound audio • Monitor(s) can be located up to 35 ft. from the splitter (25 ft.
PAGE 3
Mounting Instructions The B156-002, B156-002-DVI, and B156-002-HDMI come with mounting hardware that allows them to be mounted in a variety of ways. The following images show the different ways the included mounting brackets can be attached for different mounting methods. Note: The images below show a B140-1A0, but the mounting hardware installation is the same for the B156-002, B156-002-DVI, and B156-002-HDMI. Wallmount 19” Rackmount 13-03-220-93323C.
PAGE 4
Installation Instructions UP TO 35ft. (10.6m) UP TO 16ft. (5m) B156-002 Note: The installation diagram shows a B156-002, but installation will be the same for the B156-002-DVI and B156-002-HDMI. 1 Make sure the DisplayPort source is powered off. 2 Connect the source to the input port on the splitter using a P580Series DisplayPort cable (or a P583-Series Mini DisplayPort to DisplayPort Cable). Note: The distance between the source and splitter must not exceed 16 ft. (5 m).
PAGE 5
Installation Instructions 5 Repeat step 3 to connect a monitor to the Output 2 port on the splitter. 6 Turn on the power to the source and connected monitors. The Orange port LEDs will illuminate to indicate that a signal is being received and video will appear on the connected monitors. 7 The connected monitors can be set to display in Mirror (Clone) or Extended modes. When in Mirror (Clone) mode, the maximum supported video resolution is 1920 x 1200 @ 60Hz.
PAGE 6
Troubleshooting 4 What length cables are you using? The B156-Series splitters have been tested at a maximum distance of 16 ft. between the source and splitter, and 35 ft. (25 ft. for B156-002) between the splitter and connected monitors. Exceeding these lengths can decrease performance 5 What type of cabling are you using? Inferior cabling can result in poor performance, so it is important that you use cables that can support the video resolution you are trying to obtain.
PAGE 7
Warranty & Warranty Registration 1-Year Limited Warranty TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center.
PAGE 8
Warranty & Warranty Registration WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union) Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and electronic equipment from Tripp Lite they are entitled to: • Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country) • Send the new equipment back for recycling when this ultimately becomes waste WARNING