Owner`s manual

ManualsBrandsTripp Lite ManualsTVs & monitorsDDR1327NBMSC

Owner’s Manual

Notebook / Monitor

Desk Clamp

MODEL: DDR1327NBMSC

CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR

PROPERTY DAMAGE MAY OCCUR!

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

75x75/100x100

27”

MAX

10”-15”

MONITOR

10kg

(22lbs)

MAX

LAPTOP

5kg

(11lbs)

MAX

Este manual esta disponible en español en la página de Tripp Lite: www.tripplite.com

Ce manuel est disponible en français sur le site Web de Tripp Lite : www.tripplite.com

Русскоязычная версия настоящего руководства представлена на веб-сайте компании

Tripp Lite по адресу: www.tripplite.com

Dieses Handbuch ist in deutscher Sprache auf der Tripp Lite-Website verfügbar: www.tripplite.com

PROTECT YOUR INVESTMENT!

and ultimate peace of mind.

You could also win an ISOBAR6ULTRA

surge protector—a $50 value!

www.tripplite.com/warranty

14-12-199-9333D5.indd 1 12/22/2014 9:30:52 AM

Summary of content (12 pages)

PAGE 1
Owner’s Manual Notebook / Monitor Desk Clamp MODEL: DDR1327NBMSC CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR! 75x75/100x100 27” MAX 10”-15” MONITOR 10kg (22lbs) MAX LAPTOP 5kg (11lbs) MAX Este manual esta disponible en español en la página de Tripp Lite: www.tripplite.com Ce manuel est disponible en français sur le site Web de Tripp Lite : www.tripplite.
PAGE 2
NOTE: Read the entire instruction manual before you start installation and assembly. WARNING • Do not begin the installation until you have read and understood the instructions and warnings contained in this manual. If you have any questions regarding any of the instructions or warnings, please visit www.tripplite.com/support. • This mounting bracket was designed to be installed and utilized ONLY as specified in this manual. Improper installation of this product may cause damage or serious injury.
PAGE 3
Component Checklist IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installing. If any parts are missing or faulty, visit www.tripplite.com/support for service.
PAGE 4
1. Install Desk Mount Assembly Note: min. desktop thickness=10mm (.4”) max. desktop thickness=60mm (2.4”) • Determine approximate location for mount, keeping in mind display size, height adjustment and pitch/roll requirements. • Slip the desk mount assembly over the edge of desk so that clamp fully contacts desk edge. • Turn the knob to adjust the clamp to edge of desk and secure it tightly. 4 14-12-199-9333D5.
PAGE 5
2. Install Arms Arm End Cap x2 Collar 5 14-12-199-9333D5.
PAGE 6
3. Install Display 3-1 Attach Display to Monitor Mounting Assembly TV TV TV Washer 4mm Hex Key M4X8 M5X8 Attach the display to the monitor mounting assembly with the appropriate included screws. Do not over-tighten screws. 6 14-12-199-9333D5.
PAGE 7
3. Install Display 3-2 Attach Display to Arm Sleeve Arm Knob Sleeve Arm Always use an assistant or mechanical lifting equipment to safely lift and position displays. Make sure the display is safely secured before releasing. Tighten knob firmly, but do not over-tighten. 7 14-12-199-9333D5.
PAGE 8
4. Adjustment 360° 180° +90° – 80° Tighten 6mm Hex Key 4mm Hex Key Once the displays are adjusted to their final desired position, tighten the bolts using the included hex keys. Do not over-tighten bolts. 8 14-12-199-9333D5.
PAGE 9
5. Install Notebook Computer 5-1 Attach Notebook Mounting Assembly Sleeve Arm Knob Tighten knob firmly, but do not over-tighten. 5-2 Attach Notebook Holder Slide the back of the notebook holder down onto the notebook mounting assembly until you hear a click. 9 14-12-199-9333D5.
PAGE 10
5. Install Notebook Computer 5-3 Attach Safety Clips Attach safety clips by sliding them onto rails located on the rotatable side arms and front section of the notebook holder. Safety Clip (Side) Safety Clip (Front) 10 14-12-199-9333D5.
PAGE 11
5. Install Notebook Computer 5-4 Secure Notebook Computer Place notebook computer in the notebook holder, ensuring it’s firmly seated on the front clips. Rotate the side arms inward until the clips rest firmly against the sides of the computer . Tighten the two knobs on the back the notebook holder to secure the computer 3 . 3 Tighten 4mm Hex Key Once the displays are adjusted to their final desired position, tighten the bolts using the included hex keys. Do not over-tighten bolts.
PAGE 12
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support 12 14-12-199-9333D5.