Owner`s manual

11
Place notebook computer in the notebook holder, ensuring it’s firmly seated on the front clips. Rotate the side
arms inward until the clips rest firmly against the sides of the computer . Tighten the two knobs on the back
the notebook holder to secure the computer
3
.
5. Install Notebook Computer
5-4 Secure Notebook Computer
3
Note: Press the tab on the back of the
notebook holder to release it.
Maintenance
• Check that the bracket is secure and safe to use at regular intervals (at least every three months).
• Please visit www.tripplite.com/support if you have any questions.
4mm Hex Key
Tighten
Once the displays are adjusted to their final desired position, tighten the bolts using the included
hex keys.
Do not over-tighten bolts.
14-12-199-9333D5.indd 11 12/22/2014 9:30:53 AM