Product Data Sheet / Brochure

HDMI over Cat5/Cat6 Active Extender, Pigtail-Style
Receiver for Video and Audio, 1080p @ 60 Hz, USB
Powered
MODEL NUMBER: B126-1A0-U
Description
The B126-1A0-U HDMI over Cat5/Cat6 Active Extender works with Tripp Lite’s B126-002 or B126-004
transmitter to extend an HDMI audio/video signal to an HDMI projector, monitor or television. It’s ideal for digital signs, trade shows, presentations, classrooms,
churches, retail settings and other applications where the video source is located farther than conventional cables allow.
The receiver’s built-in HDMI cable connects to the display. Cat5e/6 cable connects the receiver to the B126-Series transmitter(for best results, use 24 AWG
solid-wire Cat5e/6 cable, such as Tripp Lite’s N202-Series). Power is supplied by the included USB Micro-B to USB-A cable, which connects between the
receiver and a USB port on the display or a USB wall charger.
The B126-1A0-U can extend a 1080p(@ 60 Hz) signal up to 125 feet with full, rich stereo. Built-in RJ45 LEDs indicate the units are receiving power and a
signal from the source. Built-in equalization control lets you fine-tune the image quality at the display. Easy to set up with no software or drivers to install. Works
with all operating systems and HDMI sources.
Features
Extends HDMI Audio/Video Signals to an HDMI Display
Extends a 1080p (@ 60 Hz) signal up to 125 ft.
Ideal for digital signs, trade shows, presentations, classrooms, churches and retail settings
Connects to transmitter with one Cat5e/6 cable (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite’s N202-Series)
Supports stereo audio and HDCP
Built-in equalization control lets you adjust the image
Easy to Set Up and Use
Plug-and-play engineering—no software, drivers or external power supply
Powered via included USB cable
Connects quickly to display with built-in HDMI cable
Highlights
Supports high-definition video
resolutions up to 1080p (@ 60
Hz)
Supports stereo audio and HDCP
Works with all operating systems
and HDMI sources
Plug and play—no software,
drivers or external power supply
Built-in equalization control lets
you adjust monitor image
System Requirements
Display with HDMI port
Package Includes
B126-1A0-U Receiver unit
USB Micro-B to USB-A cable, 3 ft.
Screwdriver for adjusting
equalization
Owner’s manual
1 / 2