200604111 93-2525 230V Smartonline OM.qxd 5/8/2006 9:58 AM Page 1 Owner’s Manual SmartOnline™ • Intelligent, True On-Line Tower UPS Systems • True On-Line Operation • Pure Sine Wave Output • 220/230/240V Input/Output Models: SUINT1000XL, SUINT2000XL & SUINT3000XL Not suitable for mobile applications. Important Safety Instructions 2 Quick Installation 3 Optional Installation 4 Basic Operation 5 Troubleshooting 9 Storage and Service 11 Español 12 Français 23 1111 W.
00604111 93-2525 230V Smartonline OM.qxd 5/8/2006 9:58 AM Page 2 Important Safety Instructions SAVE THESE INSTRUCTIONS This manual contains instructions and warnings that should be followed during the installation, operation and storage of all Tripp Lite UPS Systems. Failure to heed these warnings will void your warranty. UPS Location Warnings • Install your UPS indoors, away from excess moisture or heat, conductive contaminants, dust or direct sunlight.
200604111 93-2525 230V Smartonline OM.qxd 5/8/2006 9:58 AM Quick Installation Connection and Start-Up 1 Plug your UPS into an electrical outlet. Note: The UPS system does not include an input power cord. 1A Model SUINT1000XL Only: Connect a user-supplied power cord to the IEC320-C14 input receptacle. The power cord should have an IEC-320-C13 connector on one end and a plug appropriate for your local site’s utility outlets on the other end.
200604111 93-2525 230V Smartonline OM.qxd 5/8/2006 9:58 AM Page 4 Optional Installation The connections are optional. Your UPS will function properly without these connections. 1 Serial Port Connection Using the serial cable provided, connect the serial port on your computer to the serial port of your UPS. Install on your computer the PowerAlert UPS monitoring software program (included on CD-ROM) appropriate for your operating system.
200604111 93-2525 230V Smartonline OM.qxd 5/8/2006 9:58 AM Page 5 Important Basic Operation Safety Instructions Front Panel Switches “ON/TEST” Switch: This switch controls four separate UPS functions: UPS Power ON: To turn the UPS on, press this switch, hold it for several seconds until you hear a beep, then release it. The “ON LINE” LED will illuminate. UPS Self-Test: During normal on-line operation, press this switch and hold it until you hear a beep.
200604111 93-2525 230V Smartonline OM.qxd Basic Operation Front Panel Indicator Lights 5/8/2006 9:58 AM Page 6 (continued) continued “BYPASS” LED: This yellow light will be lit when the UPS’s DC/AC inverter is deactivated and the UPS is in the “Bypass” mode.
200604111 93-2525 230V Smartonline OM.qxd Basic Operation Front Panel Indicator Lights 5/8/2006 9:58 AM Page 7 (continued) continued “REPLACE BATT” LED: This red light will be lit and the UPS alarm will beep every 2 seconds if your UPS’s microprocessor detects a battery fault or if your UPS fails the automatic self-test (after you turn your UPS ON) and the UPS battery is less than fully charged. Let the UPS charge for 12 hours, then perform a second self test (Basic Operation—UPS Self-Test).
200604111 93-2525 230V Smartonline OM.qxd Basic Operation Rear Panel 5/8/2006 9:58 AM Page 8 (continued) continued External Battery Pack Connector: Use to connect optional Tripp Lite Battery Packs for additional runtime. Contact Tripp Lite Customer Support at (773) 869-1234 for the appropriate Tripp Lite battery pack to connect. Refer to instructions available with the Battery Pack for complete connection information and safety warnings.
200604111 93-2525 230V Smartonline OM.qxd 5/8/2006 9:58 AM Page 9 Troubleshooting The UPS’s control panel lights will turn on in the sequences below to signal that the UPS is having operational difficulties. Lights (On/Flashing) and Condition Solution On: REPLACE BATT Condition: Replace Battery Let the UPS system charge for at least 12 hours and perform a self test using the “ON/Test Switch” (Basic Operation— UPS Self-Test). If the light continues to stay on, contact Tripp Lite for service.
200604111 93-2525 230V Smartonline OM.qxd Troubleshooting 5/8/2006 9:58 AM Page 10 (continued) Lights (On/Flashing) and Condition Solution On: BYPASS, LINE Flashing: FAULT Check the UPS to be sure that there is adequate space for air to circulate near the vents and that the fan is working properly. Restart the UPS.
200604111 93-2525 230V Smartonline OM.qxd 5/8/2006 9:58 AM Page 11 Storage and Service Storage First turn your UPS OFF: press the “OFF” switch to turn power off at the UPS outlets, then disconnect the power cord from the wall outlet. Next, disconnect all equipment to avoid battery drain. If you plan on storing your UPS for an extended period of time, fully recharge the UPS batteries once every three months by plugging the UPS into a live AC outlet and letting the UPS charge for 4-6 hours.
200604111 93-2525 230V Smartonline OM.qxd 5/8/2006 9:58 AM Page 12 Manual del usuario SmartOnline™ Sistemas UPS inteligentes realmente en línea para montaje en torre • Operación realmente en línea • Salida sinusoidal pura • Entrada/salida de 220/230/240V Modelos: SUINT1000XL, SUINT2000XL y SUINT3000XL No conveniente para los usos móviles.
200604111 93-2525 230V Smartonline OM.qxd 5/8/2006 9:58 AM Page 13 Importantes instrucciones de seguridad GUARDE ESTAS INSTRUCCIONES Este manual contiene advertencias e instrucciones importantes que deben seguirse durante la instalación, operación y almacenamiento de todos los sistemas UPS de Tripp Lite. De no cumplirse estas advertencias, la garantía será anulada.
200604111 93-2525 230V Smartonline OM.qxd 5/8/2006 9:58 AM Instalación Conexión y encendido 1 Conecte su UPS en un tomacorriente. Nota: El no-break no incluye un cordón de alimentación de entrada. 1A 1B Modelo SUINT1000XL solamente: Conecte un cordón de alimentación suministrado por el usuario en el contacto de entrada IEC320-C14. El cordón de alimentación debe tener un conector IEC-320-C13 en un extremo y un enchufe apropiado para las salidas de su servicio eléctrico local en el otro extremo.
200604111 93-2525 230V Smartonline OM.qxd Instalación 3 5/8/2006 9:58 AM Page 15 (continuación) Encienda su sistema UPS (ON): • Presione el interruptor “ON/TEST” (Encendido/Prueba). • Manténgalo presionado por varios segundos hasta que escuche un sonido. • Suelte el interruptor. Su sistema UPS empezará a suminastrar energia CA a sus tomas de corriente. Se iluminará el LED “ON LINE” (En linea).
200604111 93-2525 230V Smartonline OM.qxd 5/8/2006 9:58 AM Page 16 Operación básica Interruptores del panel frontal Interruptor “ON/TEST” (Encendido/Prueba): Este interruptor controla cuatro funciones separadas del UPS: UPS encendido: Para encender el UPS, presione el interruptor, manténgalo presionado por varios segundos hasta que escuche un sonido y suéltelo. Se encenderá el LED “ON LINE”.
200604111 93-2525 230V Smartonline OM.qxd Operación básica 5/8/2006 9:58 AM Page 17 (continuación) Luces indicadoras del panel frontal continuación LED “BYPASS” (Derivación): Esta luz amarilla se ilumina para indicar que el inversor de CC/CA del UPS se encuentra desactivado y el UPS está en el modo “Derivación”.
200604111 93-2525 230V Smartonline OM.qxd Operación básica 5/8/2006 9:58 AM Page 18 (continuación) Luces indicadoras del panel frontal continuación LED “REPLACE BATT” (Reemplazar batería): La luz roja se encenderá, y la alarma del UPS sonará cada 2 segundos si el microprocesador del UPS detecta una falla en la batería o si su UPS falla en la autoprueba automática (después de encendido) y en caso de que la batería no esté completamente cargada.
200604111 93-2525 230V Smartonline OM.qxd Operación básica Panel posterior 5/8/2006 9:58 AM Page 19 (continuación) continuación Conector del paquete de baterías externas: Utilícelo para conectar paquetes de baterías Tripp Lite opcionales si desea tiempo de funcionamiento adicional. Póngase en contacto con el Servicio de atención al cliente de Tripp Lite al (773) 869-1234 para obtener el paquete de baterías Tripp Lite adecuado.
0604111 93-2525 230V Smartonline OM.qxd 5/8/2006 9:58 AM Page 20 Localización de fallas Las luces del panel de control del UPS se encenderán en las secuencias descritas a continuación para indicar que el UPS tiene dificultades de funcionamiento.
200604111 93-2525 230V Smartonline OM.qxd Localización de fallas 5/8/2006 9:58 AM Page 21 (continuación) Luces (Encendidas/Parpadeando) y condición Solución Encendidas: DERIVACIÓN, LÍNEA Parpadeando: FALLA 100%, 75% Condición: En derivación debido a alta temperatura interna Revise el UPS para asegurarse de que hay suficiente espacio para permitir la circulación de aire cerca de las ranuras de ventilación y que el ventilador esté funcionando correctamente. Reinicie el UPS.
200604111 93-2525 230V Smartonline OM.qxd Almacenamiento y servicio 5/8/2006 9:58 AM Page 22 (continuación) Servicio Antes de enviar su UPS para que le presten servicio, siga los siguientes pasos: 1. Verifique las instrucciones de instalación y operación en este manual para asegurarse que el problema de servicio no sea causado por una mala interpretación de las instrucciones. Además, verifique que los interruptores automáticos del UPS no hayan sido disparados.
200604111 93-2525 230V Smartonline OM.qxd 5/8/2006 9:58 AM Page 23 Guide de l'utilisateur SmartOnline™ Systèmes de tours ASI connectées intelligentes • Fonctionnement réel en ligne • Puissance de sortie sinusoïdale • Entrée/Sortie 220/230/240V Modèles : SUINT1000XL, SUINT2000XL & SUINT3000XL Non approprié aux applications mobiles.
200604111 93-2525 230V Smartonline OM.qxd 5/8/2006 9:58 AM Page 24 Importantes consignes de sécurité CONSERVEZ CES INSTRUCTIONS EN UN LIEU SÛR Le présent guide contient des instructions et des mises en garde qui doivent être suivies lors de l'installation, de l'exploitation et de l'entreposage de tous les systèmes UPS Tripp Lite. Ne pas tenir compte de ces mises en garde annule la garantie.
200604111 93-2525 230V Smartonline OM.qxd 5/8/2006 9:58 AM Page 25 Installation Connexion et démarrage 1 Branchez votre ASI dans une prise de courant électrique. Remarque: : L'onduleur UPS ne comprend pas de cordon d'alimentation. 1A 1B Modèle SUINT1000XL uniquement : Connecter un cordon d'alimentation fourni par l'utilisateur dans la prise d'entrée IEC-320-C14.
200604111 93-2525 230V Smartonline OM.qxd Installation 3 5/8/2006 9:58 AM Page 26 (suite) Mettez votre système UPS en marche : • Appuyez sur le commutateur « ON/TEST » (MARCHE/TEST) • Maintenez-le enfoncé pendant plusieurs secondes jusqu’à ce que vous entendiez un signal sonore • Relâchez-le Votre système UPS commence à alimenter ses prises en tension c.a. Le voyant « ON LINE » (ALIMENTATION) s’allume.
200604111 93-2525 230V Smartonline OM.qxd 5/8/2006 9:58 AM Page 27 Important Exploitation Safety de base Instructions Commutateurs du panneau avant Commutateur « ON/TEST » (MARCHE/TEST) : Le commutateur commande quatre fonctions distinctes du système UPS : Mise en fonction du système UPS : Pour allumer le système UPS, appuyez sur le commutateur et maintenez-le enfoncé pendant plusieurs secondes jusqu’à ce que vous entendiez un signal sonore puis relâchez-le.
200604111 93-2525 230V Smartonline OM.qxd Exploitation de base Voyants du panneau avant 5/8/2006 9:58 AM Page 28 (suite) suite VOYANT « BYPASS » (ÉVITEMENT) : Ce voyant jaune s’allume pour signaler que le convertisseur c.c./c.a. est désactivé et que le système UPS est en mode d’évitement. En cours de fonctionnement normal, ce voyant DEL s’allume brièvement lorsque l’appareil est branché.
200604111 93-2525 230V Smartonline OM.qxd Exploitation de base Voyants du panneau avant 5/8/2006 9:58 AM Page 29 (suite) suite VOYANT DEL « REPLACE BATT » (REMPLACER LA BATTERIE) : Ce voyant rouge s'illuminera et l'alarme de l'UPS retentira toutes les 2 secondes si le microprocesseur du système UPS détecte une défaillance de batterie ou si l’autotest du système UPS échoue (après que vous allumez votre système UPS) et que la batterie du système UPS n’est pas complètement chargée.
200604111 93-2525 230V Smartonline OM.qxd Exploitation de base Panneau arrière 5/8/2006 9:58 AM Page 30 (suite) suite Connecteur pour bloc-batterie externe : Utilisez-le pour relier des blocs-batteries Tripp Lite supplémentaires de manière à augmenter la durée d'exécution. Communiquez avec le service à la clientèle de Tripp Lite au (773) 869-1234 pour connaître le bloc-batterie Tripp Lite approprié à brancher.
200604111 93-2525 230V Smartonline OM.qxd 5/8/2006 9:58 AM Page 31 Dépannage Les voyants du panneau de configuration du système UPS s’allument selon la séquence ci-dessous pour indiquer que le système UPS ne fonctionne pas normalement. Voyants (allumés/clignotent) et problème Solution Allumés : REPLACE BATT(REMPLACER LA BATTERIE) Problème : Remplacez la batterie.
200604111 93-2525 230V Smartonline OM.qxd Dépannage 5/8/2006 9:58 AM Page 32 (suite) Voyants (allumés/clignotent) et problème Solution Allumés : FAULT, BYPASS, LINE (DÉFAILLANCE, ÉVITEMENT, ALIMENTATION) Clignotent : 25 % Problème : En mode d’évitement en raison d’une tension de source basse Redémarrez le système UPS. Si le problème persiste, consultez le service à la clientèle de Tripp Lite.
200604111 93-2525 230V Smartonline OM.qxd 5/8/2006 9:58 AM Page 33 Entreposage et entretien Entreposage Veuillez d’abord éteindre votre système UPS : appuyez sur le commutateur « OFF » (ARRÊT) pour couper l’alimentation électrique au niveau des prises du système UPS puis débranchez le cordon d’alimentation de la prise murale. Débranchez ensuite tout le matériel pour éviter d’épuiser la batterie.
200604111 93-2525 230V Smartonline OM.
200604111 93-2525 230V Smartonline OM.
200604111 93-2525 230V Smartonline OM.qxd 5/8/2006 9:58 AM Page 36 1111 W. 35th Street Chicago, IL 60609 USA Customer Support: (773) 869-1234 • www.tripplite.