Use and Care Manual

Display UPS/Power Conditions

Line Power Mode LCD Data

The LCD screen oers 6 screens of UPS and site power information as the UPS is operating in line power mode. To advance to the next

screen, press the

button. The screens are displayed in this order:

MUTE

1 2

MUTE

1. OUTPUT VOLTAGE 2. INPUT/OUTPUT FREQUENCY 3. OUTPUT LOAD PERCENT

4. OUTPUT LOAD WATTAGE 5. INPUT VOLTAGE 6. BATTERY VOLTAGE

Battery Power Mode LCD Data

The LCD screen oers 6 screens of UPS and site power information as the UPS is operating in battery power mode. When the UPS

switches to BATTERY MODE, the UPS will automatically switch to report ESTIMATED RUNTIME. To advance to the next screen, press the

button. The screens are displayed in this order:

1. ESTIMATED RUNTIME 2. OUPUT VOLTAGE 3. OUTPUT FREQUENCY

4. OUTPUT LOAD PERCENTAGE 5. OUTPUT LOAD WATTS 6. BATTERY VOLTAGE

Basic Operation continued

Enable/Disable Alarm

To enter silent mode, press and hold the button until you hear an audible beep. The icon will appear on the LCD screen to

indicate the unit is in silent mode. To exit silent mode, press and hold the

button until you hear an audible beep. The

icon will

disappear from the LCD screen to indicate it’s no longer in silent mode. Note: Silent mode can only be selected while the unit is in online

mode. Silent mode will deactivate the beeper completely.

To temporarily mute the alarm while the unit is in battery mode, press and hold the

button until the icon on the LCD

screen to indicate that the alarm has been temporarily muted. Note: The low battery alarm will still sound even if the battery alarm is

temporarily muted.

12-12-069-93-327C.indb 6 12/6/2012 9:28:36 AM