Use and Care Manual

UPS Features

1. ON/OFF Buon: Press and hold the POWER

BUTTON for one second to turn the UPS on and o. If utility power is not available,

pressing this button will “cold-start” the UPS; i.e. turn it on and supply battery-derived power to the outlets.

2. MUTE/Select Buon: Use this button to toggle power condition displays. Refer to Display UPS/Power Conditions section for details.

This button can also be used to place the unit in silent mode (mute the beeper completely) or to temporarily mute an active alarm

by pressing and holding the button until the mute icon ashes on the LCD screen.

3. TEST Buon: Press and hold this button and the UPS will begin a self-test lasting about 10 seconds.

4. Tel/DSL/NETWORK Line Protecon Jacks: These jacks protect equipment against surges over a single phone line or network

connection. Connecting your equipment to these jacks is optional. Your UPS will work properly without this connection.

5. Coaxial Line Protecon Jacks: These jacks protect equipment against surges over coaxial line. Connecting your equipment to these

jacks is optional. Your UPS will work properly without this connection.

6. USB Communicaon Port: This port can connect your UPS to any computer for automatic saves and unattended shutdown

in the event of a power failure. Use with Tripp Lite’s PowerAlert Software (available as a FREE download at www.tripplite.com) and

appropriate USB cable. A USB cable is included with your UPS. This connection is optional. Your UPS will work properly without this

connection. Note : This UPS System provides basic communication compatibility with most integrated Windows

, Macintosh

and

Linux

power management applications.

7. SURGE SUPPRESSION ONLY Outlets: These outlets oer premium surge suppression for accessories not requiring battery backup

support. These outlets are always energized when the UPS is connected to a live outlet, even if the UPS is turned o.

8. BATTERY BACKUP Outlets: These outlets oer battery backup support and premium surge suppression for critical devices requiring

battery backup support. Note : Do not plug laser printers into the battery backup outlets.

9. Reseable Input Circuit Breaker: Protects your electrical circuit from over current draw from the UPS load. If this breaker trips,

remove some of the load, then reset it by pressing it in.

Features

12-12-069-93-327C.indb 8 12/6/2012 9:28:38 AM