Specifications

ManualsBrandsTripp Lite Manualschassis componentsSR4POST25

Quick Assembly Guide

SmartRack

™

4-Post Open Frame Racks

(SR4POST, SR4POST1224,

SR4POST13, SR4POST25)

Contents:

Section 1 – Parts Identiﬁcation

Section 2 – Rack Assembly

Section 3 – Optional Casters

Section 4 – Service & Warranty

1111 W. 35th Street, Chicago, IL 60609 USA

www.tripplite.com/support

SAVE THESE INSTRUCTIONS

This manual contains important instructions and warnings that must be followed during installation.

Failure to comply may affect the warranty.

Warranty

Registration

chance to win a FREE Tripp Lite

product! www.tripplite.com/warranty

Summary of content (8 pages)

PAGE 1
ty on for a Lite anty n ra ti ay ripp arr ar strae tod EE T m/w W i lin FR .co g n te Reter o win a ippli r s gi to w.t Re ce ww an t! ch uc od pr Quick Assembly Guide SmartRack™ 4-Post Open Frame Racks (SR4POST, SR4POST1224, SR4POST13, SR4POST25) Contents: Section 1 – Section 2 – Section 3 – Section 4 – Parts Identification Rack Assembly Optional Casters Service & Warranty SAVE THESE INSTRUCTIONS This manual contains important instructions and warnings that must be followed during installation.
PAGE 2
1 – Parts Identification After opening the shipping box, lay out the parts on a flat surface for identification. If anything is missing or damaged, go to www.tripplite.com/support for assistance. Note: SR4POST is shown. SR4POST13 & SR4POST25 are shorter (13U & 25U, respectively) and SR4POST1224 uses round/threaded equipment mounting holes instead of square holes. However, the rack assembly process for all 4 models is identical.
PAGE 3
2 – Rack Assembly Warning: Install the rack in a controlled, structurally sound, indoor environment with a level floor. Use appropriate caution when moving the rack and consider whether you require assistance. Assemble the rack completely and confirm its stability before attempting to install equipment in the rack. Note: SR4POST is shown, but the assembly process is identical for SR4POST1224, SR4POST13, & SR4POST25.
PAGE 4
2 – Rack Assembly continued 2-3 Lay out a left vertical rail A , right vertical rail B , assembled top section F / G / F and assembled bottom section D / E / D in a rectangle on the floor or a stable work surface. (Place all the pieces facedown. The assembled top and bottom sections are facedown when the inserted bolt heads are facedown. The vertical rails are facedown when the rails are laying flat on the side that has keyhole mounting slots.
PAGE 5
2 – Rack Assembly continued 2-6 Fasten a left vertical rail A and assembled bottom section D / E / D to the base bracket C with two M8 acorn/cap nuts I and M8 washers K . Tighten 90%. (The threaded M8 studs at the end of the assembled bottom section should pass through the vertical rail first, then the base bracket.) 2-6 A D K I C D E A D C 2-7 Fasten an assembled top section F / G / F to F 2-7 the top bracket C and left vertical rail A with an M8 acorn/cap nut I and M8 washer K . Tighten 90%.
PAGE 6
2 – Rack Assembly continued 2-9 Fasten a top bracket H to the threaded M8 2-9 stud at the end of the assembled top section F / G / F with an M8 acorn/cap nut I and M8 washer K . Also fasten the base bracket to the threaded M8 stud at the end of the other assembled bottom section with an M8 acorn/ cap nut I and M8 washer K .Tighten 90%. (The threaded M8 studs should pass through the vertical rails first, then the top bracket.
PAGE 7
2 – Rack Assembly continued 2-12 (Optional Cable Management Hooks) Fasten the included cable management hooks W to the vertical rack rails with the included screws X . 2-12 W X 3 – Optional Casters Warning: Do not attempt to install casters while equipment is installed in the rack. Note: Caster installation requires Tripp Lite’s Heavy-Duty Rolling Caster Kit (model SRCASTER, sold separately). The kit includes four casters and the M6 hardware required to mount the casters to the bottom of the rack.
PAGE 8
4 – Service, Warranty & Warranty Registration Service Your Tripp Lite product is covered by the warranty described in this manual. A variety of Extended Warranty and OnSite Service Programs are also available from Tripp Lite. For more information on service, visit www.tripplite.com/ support. Before returning your product for service, follow these steps: 1.