User Manual

Features
Protects Mission-Critical Rack-Mounted Equipment
Provides fully regulated sine wave AC output for servers, network storage devices and telecom
hardware
●
+/-2% voltage regulation in online and battery modes
●
Selectable 100/110/120/127V output voltage
●
6 NEMA 5-15/20R and 1 L5-20R outlets
●
10 ft. power cord with NEMA 5-20P input
●
570-joule surge suppression rating
●
Reliable Battery Backup with Expandable Runtime
Supports half load for 12 min. and full load for 4 min.
●
Zero transfer time suitable for advanced network applications
●
Expandable runtime with optional external battery packs, such as Tripp Lite’s BP48V24-2U
●
Battery independent restart ensures automatic UPS power-up after lengthy power outages, even with
expired batteries.
●
ENERGY STAR Certification
Saves money and energy and protects environment by meeting strict EPA efficiency guidelines
●
Pre-Installed WEBCARDLX Network Interface
Allows full remote access for power monitoring, configuration, control and email notifications via secure
web browser, SNMP, telnet or SSH
●
Optional EnviroSense2 sensors (sold separately) enable site monitoring of temperature, humidity and
contact-closure status
●
Switchable Numbered Load Banks
Outlets are divided into 2 numbered load banks, each of which may be individually powered on and off
remotely to reset or reboot connected equipment
●
Interactive LCD Screen
Reports detailed status information, including load, voltage and battery levels
●
Offers advanced configuration and setup options, including output voltage and operating mode
●
EMI/RFI Line Noise Filtering
Removes electromagnetic and radio frequency interference that can disrupt or damage equipment’s
performance
●
Audible Alarm
Indicates startup/shutdown, power failure, low battery, overload and fault conditions
●
Communications Ports
USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite’s PowerAlert
software (available via free download at www.tripplite.com/poweralert)
●
2 / 7