Owner’s Manual Multi-Function Optical Fiber Cable Tester Model: T020-001-PSF PROTECT YOUR INVESTMENT! Register your product for quicker service and ultimate peace of mind. You could also win an ISOBAR6ULTRA surge protector—a $100 value! www.tripplite.com/warranty 1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support 15-11-089-9334DC-EN.indd 1 Copyright © 2015 Tripp Lite. All rights reserved.
Package Includes • T020-001-PSF Tester Unit • Owner’s Manual Product Features • All-in-One Optical Fiber cable tester with Power Meter, Light Source, and Visual Fault Locator • Easy-to-use LCD interface • Determine optical power loss • Visual fault locator finds visual faults in the cable, featuring multiple frequency settings for continuous and flashing modes • Light Source supports 1310 nm and 1550 nm wavelengths • Power Meter supports 850 nm, 1300 nm, 1310 nm, 1490 nm, 1550 nm and 1625 nm wavele
Cable Tester Unit 1 Power Button – When off, press this button to turn the unit on. When on, press this button to toggle the Auto-Off feature on/off, or hold it down to turn off the unit. 2 Power Meter / Light Source Button ( ) – Press this button to toggle the LCD screen between the Power Meter and Light Source screens. 3 Reference Button ( ) – When testing for power loss between an external light source and the power meter, hold this button down to save the current power loss value.
Cable Tester Unit (continued) 5 Wavelength / VFL Button ( ) – Press this button to change the wavelength setting in the power meter and light source screens. Hold it down to activate the Visual Fault Locator. 6 Frequency / OSL Button ( ) – Press this button to change the frequency when measuring the optical light source power loss or using the visual fault locator. Hold it down to initiate an optical light source power loss measurement.
LCD Screen 2 3 5 1 4 6 1 Power loss measurement data, with the unit of measurement shown to its right. 2 Selected wavelength. 3 A saved power loss reference value or the selected frequency value. 4 Battery icon showing the remaining battery capacity. 5 Power cord icon will display if you are using rechargeable batteries and charging them via the USB Micro-B connector on the side of the unit. 6 Auto-off icon will display if the Auto-off function is currently on.
Power Meter Screen When turning on the unit, the power meter screen is the first to be displayed. When in a screen other than the power meter screen, press the Power Meter / Light Source ( ) button on the unit to access it. The power meter screen consists of the power data in the center of the screen, with the selected unit of measurement displayed to the right of it. The selected wavelength is in the upper-left corner of the screen.
Light Source Screen To access the light source screen, press the Power Meter / Light Source ( ) button on the unit, toggling from the power meter screen to the light source screen. The light source screen consists of the wavelength in the center of the screen and the frequency in the upper-right corner. • Press the Wavelength / VFL button ( ) to toggle between the available wavelengths. The built in light source supports wavelengths of 1310 nm and 1550 nm.
Warranty and Product Registration 1-YEAR LIMITED WARRANTY TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center.