Owner’s Manual DisplayPort over Cat6 4K Extender Kits and Receiver with Repeater DisplayPort over Cat6 Extender Kit: B127A-1A1-BDBD DisplayPort to HDMI over Cat6 Extender Kit: B127A-1A1-BDBH DisplayPort over Cat6 Receiver with Repeater: B127A-110-BD DisplayPort over Cat6 Transmitter with Repeater Extender Kit: B127A-111-BDTD Este manual está disponible en español en la página de Tripp Lite : tripplite.com/support Ce manuel est disponible en français sur le site Web de Tripp Lite : tripplite.
Package Contents • Transmitter • Receiver • External Power Supply (Input: 100-240V, 50/60 Hz, 0.6A; Output: 24V 1A) • (4x) International Plugs* • Mounting Hardware • Owner's Manual *Includes NEMA 1-15P (North America), CEE 7/16 Schuko (Europe), BS 1363 (U.K.
• Receiver features built-in Toslink port for audio extraction function • Compatible with B127A-010-H signal booster (sold separately) to increase transmission distance up to 400 ft. from the source • HDCP 2.2 compatible • Plug-and-play - no software or drivers required • Supports bi-directional IR and USB 1.
Product Features B127A-110-BD • DisplayPort 1.2a over Cat6 daisy-chainable receiver with repeater and Power over Cable (PoC) • Extends and repeats a 4K x 2K (3840 x 2160) @ 30 Hz signal up to 230 ft. (70 m) from the source in daisy-chain installations • Can be daisy-chained up to 4 times via additional B127A-110-BD units, each link capable of adding an additional 230 ft. of transmission distance for a total of 920 ft.
Product Features B127A-111-BDTH • DisplayPort 1.2a over Cat6 daisy-chainable extender kit with Power over Cable (PoC) • Extends and repeats a 4K x 2K (3840 x 2160) @ 30 Hz signal up to 230 ft. (70 m) from the source in daisy-chain installations • Can be daisy-chained up to 4 times via additional B127A-110-BD units, each link capable of adding an additional 230 ft. of transmission distance for a total of 920 ft.
Disclaimer Before installation, check the following settings of your source(s) and TV/monitor(s): 1. Set to display 60 Hz. Double-check factory settings, in case the default is set to a lower frequency (Hz) than advertised. 2. Ensure the input setting of your monitor is set at HDMI 2.0 or DisplayPort 1.2a. Some displays may have default setting at HDMI 1.4. Note: This is only important for the B127A-1A1-BDBH model; the B127A-1A1BDBD, B127A-110-BD and B127A-111-BDTD will need DP 1.2a settings. 3.
Mounting Instructions The B127A-1A1-BDBH, B127A-1A1-BDBD, B127A-110-BD and B127A-111-BDTD include mounting hardware that allows for a variety of mounting methods. The following images illustrate how the included mounting brackets can be attached for different installations. Note: The model shown in the below images is for illustrative purposes only. Your product may vary by model number, size or port orientation. The mounting options for all over IP units are the same.
Standard Extender Kit Installation Model B127A-1A1-BDBH Notes: 1) Test to ensure the entire installation works properly before pulling cables through ceilings/walls. 2) To achieve maximum distance and performance, use 24 AWG solid wire Cat6 cable. Using stranded-wire Cat6 cable or cable with a gauge (AWG) size higher than 24 AWG will result in shorter extension distance. Higher gauge cabling, such as 26 AWG, has a more limited transmission capability than lower gauge cabling.
Standard Extender Kit Installation 2. Using a DisplayPort cable, connect the DisplayPort source to the INPUT port on the local transmitter unit. 3. Optional for B127A-1A1-BDBH: Using an HDMI cable (such as Tripp Lite P569-XXX-CERT or P568-XXX-2A Series cables), connect a local monitor to the LOCALOUT port on the B127A-1A1-BDBH local transmitter unit. 4. Using Cat6 cable, connect the RJ45 port on the local transmitter unit to the RJ45 port on the remote receiver unit. 5.
Standard Extender Kit Installation Model B127A-1A1-BDBD Notes: 1) Test to ensure the entire installation works properly before pulling cables through ceilings/walls. 2) To achieve maximum distance and performance, use 24 AWG solid wire Cat6 cable. Using stranded-wire Cat6 cable, or cable with a gauge (AWG) size higher than 24 AWG, will result in shorter extension distance. Higher gauge cabling, such as 26 AWG, has a more limited transmission capability than lower gauge cabling.
Standard Extender Kit Installation 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Make sure all equipment in the installation—such as monitors, the DisplayPort source and the transmitter—is powered OFF. Using a DisplayPort cable, connect the DisplayPort source to the INPUT port on the local transmitter unit. Using an HDMI cable (such as Tripp Lite P569-XXX-CERT or P568-XXX-2A Series cables), connect a local monitor to the LOCALOUT port on the B127A-1A1-BDBD local transmitter unit.
Standard Extender Kit Installation Model B127A-111-BDTD Notes: 1) Test to ensure the entire installation works properly before pulling cables through ceilings/walls. 2) To achieve maximum distance and performance, use 24 AWG solid wire Cat6 cable. Using stranded-wire Cat6 cable or cable with a gauge (AWG) size higher than 24 AWG will result in shorter extension distance. Higher gauge cabling, such as 26 AWG, has a more limited transmission capability than lower gauge cabling.
Standard Extender Kit Installation 1. Make sure all equipment in the installation—such as monitors, the DisplayPort source and the transmitter—is powered OFF. 2. Using a DisplayPort cable, connect the DisplayPort source to the INPUT port on the local transmitter unit. 3. Optional: Using an HDMI cable (such as Tripp Lite P569-XXX-CERT or P568-XXX-2A Series cables), connect a local monitor to the LOCALOUT port on the B127A-1A1-BDBD local transmitter unit. 4.
Receiver with Repeater Daisy-Chain Installation Model B127A-111-BTBD and B127A-110-BD Notes: • Test to ensure the entire installation works properly before pulling cables through ceilings/walls • To achieve maximum distance and performance, use 24 AWG solid wire Cat6 cable. Using stranded wire Cat6 cable or cable with a gauge (AWG) size higher than 24 AWG will result in shorter extension distance. Higher gauge cabling, such as 26 AWG, has a more limited transmission capability than lower gauge cabling.
B127A-110-BD extender kit Up to 230 ft. (70 m) Cat6 cable at 4K/60Hz Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60Hz Toslink cable Up to 200 ft. (60.9 m) Cat6 solid cable at 4K/60Hz Up to 15 ft. (4.5 m) DisplayPort cable at 4K/60Hz Level 1 DC 24V, 1A DC 24V, 1A LOCAL INPUT OUTPUT OUTPUT INPUT OUTPUT Monitor Monitor DisplayPort Source -03-131 933D25 RevC.
Receiver with Repeater Daisy-Chain Installation 1. 2. 3. 4. Make sure all equipment in the installation – such as TVs, Blu-ray players and the transmitter – is powered OFF. Connect the DisplayPort source to the INPUT port on the B127A-111-BDTD local transmitter unit using a DisplayPort cable (such as Tripp Lite P580-Series cables).
Standard Extender Kit Installation 10. Connect the external power supply to the B127A-110-BD and plug it into a Tripp Lite surge protector, power distribution unit (PDU or uninterruptable power supply (UPS). The green power LED and the green RJ45 LED’s will illuminate to indicate the unit is receiving power. 11. To add a second B127A-110-BH, repeat steps 8 through 10. To finish your installation with a B127A-110-BH, proceed to step 12. 12.
USB/IR Controls (B127A-1A1-BDBD and B127A-1A1-BDBH only) The B127A-1A1-BDBD and B127A-1A1-BDBH extender kits provide the following functional controls: • USB 1.1 – One USB Micro-B input at transmitter, dual USB-A outputs at receiver • Bi-Directional IR – Dual 3.5 mm jacks at both the transmitter and receiver (Optional) Connect the included IR-OUT cable to the transmitter unit’s IR-OUT port. Place the sensor on the IR-OUT cable in an unobstructed area within clear view of the device being controlled.
Warranty and Product Registration 1-Year Limited Warranty TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center.
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support -03-131 933D25 RevC.
