User manual

Frequently Asked Questions (FAQs)
The following is a list of Frequently Asked Questions (FAQs) about the Keyspan Express Remote.
We frequently update our FAQs and add them to our web site and future version of this document.
For the most recent and complete version of this list, please visit the our web site at:
http://www.keyspan.com/
Frequently Asked Question List
Question:
When my Keyspan receiver is connected to my computer, the Receiver light blinks in response to
the Keyspan Express Remote Remote Control but nothing happens on the foreground application.
How do I solve this?
Answer:
Check to see if the Mapper is running. To do this, open the Keyspan Remote software. It will
report if the Mapper Status: as Running or Not Loaded. If the Mapper is not loaded, simply
start the Mapper by clicking on the START/LOAD button.
It is also possible that the Keyspan Mapper software may not be configured to use the correct
remote control. To verify this, open the Keyspan Remote Software and point the Express Remote
Control at the Receiver and press and hold any button. The Keyspan Remote software should
report which button on the remote you are pressing and application it is controlling.
If the correct button name does not appear, check to see which remote control is selected. The
Keyspan Remote Software Remote field will report which remote file is currently selected in the
Keyspan Remote Software. The remote file MUST match the remote that you are using. For
example, if you have the Keyspan 17 button remote, you must have ***17A.REM file selected. To
change the selected remote file, you must:
1. Open the Keyspan Remote Software
2. Click the Configure/Open Map Editor button (this opens the Map Editor)
3. In the Map Editor, access the Settings menu (in the menu bar), file from the
Remote command.
4. Close the Map Editor windows to save your changes
Question:
Can I use irDA with the Keyspan Express Remote?
Keyspan: Express Remote - User Manual (Mac OS X & Windows)
This User Manual applies to the Keyspan Express Remote Software Version 2.2
Rev 2004Oct28 Page 25