Owner`s manual

3
1. Introduction
Computer requirements when using 1 – 2 display adapters:
 • 1.2GHzSingleCoreCPU
 • 512MBmemory
Computer requirements when using 3 display adapters:
 • 1.8GHzSingleCoreCPU
 • 1GBmemory
Computer requirements when using 4 – 6 display adapters:
 • 1.6GHzCoreDuoCPU
 • 1GBmemory
Note: Only 1 added monitor can support DVD playback. In order to support
DVD playback, your computer must meet the following requirements:
 • 2.0GHzCoreDuoCPU
 • 1GBmemory
 • Adapterscreenresolutionmustbesetto800x600with16-bitcolor
2. Installation
Note: Install the driver on your computer before connecting the display
adapter(s).
1.InsertthedriverCDintoyourcomputer’sCD-ROMdrive.Thesetupprogramshould
runautomatically.Ifthesetupprogramfailstostartonitsown,opentheCDand
double-clickontheappropriatedriverle,dependingonyourOS.
Note:
• ForWindows2000users,ifpromptedforasystempatch,youmust
download and install the required patch before the driver can be
installed.
• ForWindowsVistaand7users,ifyouencounteraUserAccountControl
popup, choose to allow the installation to proceed. This may require an
administrator’s password. If you encounter a driver signature dialog box,
choose to continue the installation anyways.
• Ifamessagestating“DisplayLinksoftwareforUSBdisplayadapteris
already up to date,” then the necessary software for this unit is already
installed, and you can proceed to step 5.
201108084-93-3099.indd 3 8/12/2011 4:40:38 PM