User Manual

146
7. Alerts, Auto-Response and Logging
• Specify the logging level that is to be maintained for that particular TDC/UDP port/service on that particular host:
Level 0 Turns off logging for the selected TDC/UDP port to the selected host.
Level 1 Logs all connection events to the port.
Level 2 Logs all data transferred to and from the port.
• Click Add, then click Apply.
7.6.4 Auto-Response Event Logging
Check Log Events on Alerts & Logging: Auto-Response to enable logging for all auto-response activities.
7.6.5 Power Device Logging
The console server also logs access and communications with network-attached hosts and maintains a history of the UPS and
PDU power status.
To activate and set the desired levels of logging for each serial, refer to 7.4 Resolve Actions; for network ports, refer to 7.5
Configure SMTP, SMS, SNMP and/or Nagios Service for Alert Notifications; and for Power, Environment and Digital I/O
UPS, refer to section 8.