User Manual

94
5. Firewall, Failover and OOB Access
5.8.2 Configuring Client Devices
Client devices on the local network must be configured with Gateway and DNS settings. This can be done statically on each
device or using DHCP.
Manual Configuration
Manually set a static gateway address (the address of the console server) and set the DNS server address to be the same as
used on the external network. If the console server is acting as an internet gateway or a cellular router, use the ISP provided
DNS server address.
DHCP Configuration
• Navigate to the System: IP page.
• Click the tab of the interface connected to the internal network. To use DHCP, a static address must be set. Check that the
static IP and subnet mask fields are set.