User Manual

• Click on the Disabled link next to DHCP Server, which will open the System: DHCP Server page.

• Check Enable DHCP Server.

• To conﬁgure the DHCP server, select the Use interface address as gateway check box.

• Set the DNS server address(es) to be the same as used on the external network. If the console server is acting as an

internet gateway or a cellular router, then use the ISP provided DNS server address

• Enter the Default Lease time and Maximum Lease time in seconds. The lease time is the time that a dynamically

assigned IP address is valid before the client must request it again.

• Click Apply.

The DHCP server will sequentially issue IP addresses from a speciﬁed address pool(s):

• Click Add in the Dynamic Address Allocation Pools ﬁeld.

• Enter the DHCP Pool Start Address and End Address. Click Apply.

5. Firewall, Failover and OOB Access