Product Data Sheet / Brochure

PoE to USB Micro-B and RJ45 Active Splitter -
802.af, 48V to 5V 1A, Up to 328.08 ft. (100 m)
MODEL NUMBER: NPOE-SPL-G-5VMU
Active PoE splitter separates 5V 1A power to a USB Micro-B plug and 10/100/1000 Mbps Gigabit Ethernet
data to an RJ45 plug.
Features
Split Your PoE Signal into Separate Power and Ethernet Connections for Edge NetworksConnect
the NPOE-SPL-G-5VMU PoE (Power over Ethernet) splitter to your edge network up to 328 feet (100
meters) from a PoE switch or 48V injector. The splitter separates the power and data signals, delivering
5V 1A (5W) of power to the USB Micro-B plug and 10/100/1000 Mbps to the RJ45 data plug. This allows
you more flexibility in placing devices in areas where an AC outlet is unavailable and too expensive or
impractical to install.
Supports Power over Ethernet to Save You Money and Give You More Installation ChoicesThis PoE
splitter supplies the power (through its USB connector) to operate non-PoE equipment, such as security
cameras, VoIP telephones and wireless access points (WAP). This saves you the expense and effort of
purchasing, connecting and installing individual power supplies for each device. It also helps you install
devices in areas far away from AC outlets, such as poles or ceilings. The NPOE-SPL-G-5VMU supports a
wide range of input voltages from 36VDC to 57VDC and has a fixed USB output of 5VDC.
Simple Plug-and-Play Installation Has the Splitter Connected in MinutesNo configuration or software
is required to add the NPOE-SPL-G-5VMU to your LAN. It complies with 802.3af (PoE), 802.3 (Ethernet),
802.3u (Fast Ethernet) and 802.3ab (Gigabit Ethernet) standards.
Highlights
Delivers power and data via
Cat5e/6 cable up to 328.08-ft.
(100 m) to edge network
equipment
●
Extends 5VDC power to any
network device installed where
no AC outlet is available
●
Supports Gigabit Ethernet data
transfer speeds up to 1000
Mbps (1 Gbps)
●
Designed for PoE devices like
Wireless Access Points and
security cameras
●
Quick and easy plug-and-play
installation with no configuration
necessary
●
Applications
Install an Alexa-enabled device
or VoIP phone in an area
without a standard power
connection
●
Fill in Wi-Fi dead spots in your
office with a wireless access
point connected to your LAN
●
Set up digital signage in a mall,
arena, office building or theater
●
Connect security cameras and
other A/V surveillance
equipment in a video wall
●
System Requirements
IEEE 802.3af/at-compliant PoE
injector or switch
●
Existing or newly installed
Cat5e/6/6a cabling
●
A network device with a 5V 1a
USB Micro-B power port
●
1 / 3