User Manual

ManualsBrandsTripp ManualsComponents & AccessoriesLite Rack Enclosure Server Cabinet Filter Kit 25U / 42U / 45U / 48U air filter

Introduction

Important Safety Instructions

Owner’s Manual

SmartRack

Enclosure Filter Kit

Model: SRFILTER

Español 3 • Français 5

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that must be followed during the installation and operation of the product

described in this manual. Failure to comply may invalidate the warranty.

• The instructions in this manual are for common rack and rack enclosure types and may not be appropriate for all mounting applications. You

must determine the ﬁtness of hardware and procedures before mounting. If hardware or procedures are not suitable for your application,

contact the manufacturer of your rack or rack enclosure for a solution.

• Before applying adhesive strips, measure carefully to assure proper alignment. SRFILTER kit comes ready to install in 48U rack enclosures.

Vertical hook-and-loop strips must be trimmed accordingly to accommodate 42U and 25U enclosures.

PROTECT YOUR INVESTMENT!

You could also win an ISOBAR6ULTRA surge protector—a $100 value!

www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

SRFILTER Kit Beneﬁts:

• Prevents dust and particle buildup on equipment installed in a standard SmartRack Enclosure

• Facilitates hot-aisle / cold-aisle data center conﬁgurations

• Fully compatible with 25U, 42U and 48U SmartRack Enclosures

Summary of content (8 pages)

PAGE 1
Owner’s Manual SmartRack® Enclosure Filter Kit Model: SRFILTER Español 3 • Français 5 Introduction SRFILTER Kit Benefits: • Prevents dust and particle buildup on equipment installed in a standard SmartRack Enclosure • Facilitates hot-aisle / cold-aisle data center configurations • Fully compatible with 25U, 42U and 48U SmartRack Enclosures Important Safety Instructions SAVE THESE INSTRUCTIONS This manual contains instructions and warnings that must be followed during the installation and operation of the
PAGE 2
Standard Installation Parts List 4 A 20” L x 1.5” W horizontal hook-and-loop strips (3 pieces) B 40” L x 1.5” W vertical hook-and-loop strips (4 pieces) C 7/8” diameter circular hook-and-loop pieces (12 pieces) D Filter (1 piece) A C 3 Installation Procedure 1 2 B Remove self-adhesive backing strips and install the 3 horizontal hook-and-loop strips to the top, middle and bottom nonperforated sections inside the SmartRack door frame.
PAGE 3
Manual del Propietario Juego de Filtros para Gabinetes SmartRack® Modelo: SRFILTER English 1 • Français 5 Introducción Beneficios del juego SRFILTER: • Previene la acumulación de polvo y partículas en los equipos instalados en un gabinete SmartRack estándar • Facilita las configuraciones de centros de datos con pasillos calientes / pasillos fríos • Plenamente compatible con los Gabinetes SmartRack de 25U, 42U y 48U Instrucciones de Seguridad Importantes GUARDE ESTAS INSTRUCCIONES Este manual contiene ins
PAGE 4
Instalación estándar Lista de partes 4 A Tiras horizontales de “gancho y bucle” de 51 cm [20”] de Largo x 3.8 cm [1.5”] de Ancho (3 piezas) B Tiras verticales de “gancho y bucle” de 102 cm [40”] de Largo x 3.8 cm [1.
PAGE 5
Guide du propriétaire Ensemble pour filtre à boîtier SmartRack® Modèle : SRFILTER English 1 • Español 3 Introduction Avantages du kit SRFILTER : • Protège le matériel installé dans une baie SmartRack Standard, de la poussière et des dépôts de particules • Facilite les configurations des allées chaudes/froides du centre de traitement des données • Entièrement compatible avec des enceintes 25U, 42U et 48U de SmartRack Importantes consignes de sécurité SAUVEGARDER CES DIRECTIVES Ce manuel contient les direc
PAGE 6
Installation standard Liste des pièces A Rubans autoagrippants horizontaux de 50,8 cm de long par 3,81 cm de large (20 po de long par 1,5 po de large) (3 pièces) B Rubans autoagrippants verticaux de 101,6 cm de long par 3,81 cm de large (40 po de long par 1,5 po de large) (4 pièces) C Pièces autoagrippantes circulaires de 2,22 cm (7/8 po) de diamètre) (12 pièces) D Filtre (1 piece) Procédure d’installation 1 Retirer les bandes avec support autocollantes, puis installer 3 rubans autoagrippants horiz
PAGE 7
PAGE 8
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.