Manualshelf

User Manual

ManualsBrandsTripp ManualsComponents & AccessoriesLite 32-Port USB Charging Station with Syncing charging station 32 x 4 pin USB Type A - 400 Watt
12345678910
4
Powering the Hub
Insert the included power cord into the C14
inlet on the rear of the unit, then plug into a
power outlet.
Standalone Installation
The USB charger/hub can be placed on any
level surface that can safely support its weight
plus the weight of the attached cables. When
installing on a desktop or other flat surface,
remove the backing material from the rubber
feet and affix them to the bottom panel at the
corners.
Mounting and Installation
The U280-016-RMINT/U280-032-RMINT can be mounted with any 2- or 4-post rack with an
available 2U space or placed on any flat surface. Mounting hardware and four rubber feet are
included for easy mounting or placement.
Rack Installation
Secure the mounting ears to the unit using the
included hardware. Then attach the USB
charger/hub to the rack by inserting four user-
supplied screws through the mounting brackets
and into the mounting holes of the rack rail.
U280-032-RMINT Shown
U280-032-RMINT Shown
C13 to BS 1363
(UK)
C13 to CEE 7/7
(Schuko)
16-02-306-9335A1.indb 4 4/1/2016 12:21:49 PM