User Manual

5
Operation
Connecting Devices
Using a user-supplied or device manufacturer’s
shielded USB cable, insert the USB A
connector into any of the USB charger/hub’s
ports. Additional premium-quality USB cables
in various lengths and connector types are
available at www.tripplite.com.
Note: Both charge-only and charge/sync USB are
supported.
Note: A computer connection is not required when
only using the charging function.
U280-032-RMINT Shown
Connecting a Computer
In addition to device charging, the USB
charger/hub is equipped with a hub function
that syncs devices and their respective
software applications via a connected
computer. To enable the hub function, use the
included USB cable to connect the USB B
connector into USB charger/hub’s Computer
Sync Port and the USB A connector into a
computer’s USB port.
Note: When a computer connection is established
and multiple devices are connected to the USB
charger/hub, the charge rate will reduce during
syncing and resume to the normal charge rate upon
completion.
Specifications
U280-016-RMINT U280-032-RMINT
Ports 16 x USB 2.0 Type A
1 x USB 2.0 Type B
1 x USB 2.0 5-Pin Mini-B
32 x USB 2.0 Type A
1 x USB 2.0 Type B
2 x USB 2.0 5-Pin Mini-B
Transmission Speed Up to 480 Mbps
Power Requirement Input: 230V 5A/2.5A, 50/60 Hz
Output: 5.0V, 2.4A Max (per USB port)
Operating Temperature 0° to 40° C
Operating Humidity 5 to 95% RH, Non-Condensing
Dimensions (HxWxD) 8.7 (2U) x 44 x 30.5 cm
Enclosure Material Metal
Standards Tested to IEC 60950 and RoHS
Specification is subject to change without further notice.
U280-032-RMINT Shown
Note: The Firmware Upgrade Port requires a mini-USB connection (cable not included). To download the most
recent firmware updates, go to www.tripplite.com/support.
16-02-306-9335A1.indb 5 4/1/2016 12:21:49 PM