User's Manual

These drawings and specifications are the property of
TriSquare Communications and shall not be reproduced or
copied, or used as the basis for the manufacture or sale of
apparatus or devices without permission.
Model No: TSX300
TITLE:
Drawing No: NA
Base
Model:
TSX300
Owner’s Manual Draft
Rev Date: Nov. 07, 2006
3
Compiled By: mworthey Approved by: First Issued: Oct. 12, 2006
File Name: TSX300 Owner's Manual Draft.doc Drawing No: NA
Location: Kansas City
TriSquare Communications Confidential/Proprietary
Page: 5 of 14
TriSquare Communications
Standby Transmit Receive
? Volume Control
Press the Volume Up and Volume Down buttons to control the volume. The display will
indicate the current volume level for 5 seconds. An audio chime will also indicate current
volume level. All key beeps will be at the set volume level.
? Low Battery Alert
The TSX100 shall have a low battery icon that will appear on the LCD when the battery
voltage drops below the pre-defined value indicated in the electrical specifications. An
audible beep shall also sound every two minutes when the battery level is below the
threshold.
? Call
Press the Call button to send a call to other users on the same Channel. The radio will
transmit a call on the Channel that is currently showing on the display. A radio that
receives the call will play a preselected ring tone. It is not necessary to send a call
before transmitting your voice to another user on the same Channel.
? Power On/Off
To turn the XRS radio on or off, you must press and hold the POWER On/Off button for 2
seconds. Just as described above when powering the unit on, when turning the radio off,
a power off confirmation tone will be heard. All settings are retained when unit is
powered off.
ooo
STANDBY
CH: 0
CONTACTS MENU
RX
ooo
CALL
CH: 0
ooo
TRANSMIT
CH: 0
CONTACTS MENU